Larson Electronics 225 KVA Power Distribution Station - 208Y/120V to 480V 3PH - (2) 125A Secondary Breakers

Made in the USA This Larson Electronics MGS-208Y-800AMB-225KVA-480D-400AMLO-MOD1 power distribution substation converts 208Y/120V three phase electrical current into three phase 480V AC. This unit provides operators the ability to safely tap into and distribute 208Y/120V AC power from a variety of sources including generators and direct grid power. Portable Power Distribution Purpose and Use: The MGS-208Y-800AMB-225KVA-480D-400AMLO-MOD1 portable power distribution system gives operators the ability to power their 208Y/120V volt and 480 volt equipment from a single system. On the primary side, operators connect 208Y/120V volt line-in power using a customer provided cord and are provided with breakers to complete power connections. On the secondary side, operators are also provided with breakers to complete power connections. Operation: A customer provided cord brings 208Y/120V three phase power to the NEMA 3R 800-amp, 208Y/120V three phase main circuit breaker panel on the primary side, which contains one 30-amp breaker and six 20-amp breakers, and passes power to the transformer. The NEMA 3R 225 KVA transformer converts 208Y/120V three phase to 480V three phase and passes the current a 400-amp, 480V three phase main lug only panel. This secondary side contains two 125-amp breakers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-208Y-800AMB-225KVA-480D-400AMLO-MOD1 Power Transformer Ratings Line In: Customer Provided Cord UL 1640 Portable Power-Distribution Equipment Primary Voltage: 208Y/120V 3PH NEMA 3R Indoor or Outdoor Use Primary Panel: 800A 208Y/120V 3PH MCB Panel N3R Made in the USA Primary Panel breakers: (1) 30A, (6) 20A Transformer: 225KVA 208Y/120V to 480V 3PH N3R Secondary Voltage: 480V 3PH Secondary Panel: 400A 480V 3PH MLO Panel N3R Secondary Panel Breakers: (2) 125A Special Orders- Requirements Features: Contact us for special requirements Max OCP Primary: 800A @ 208Y Toll Free: 888-325-4448 Max OCP Secondary: - E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase