Larson Electronics 225 kVA Isolation Transformer - 400V Delta Primary - 230Y/133 Wye-N Secondary - V/C Meter - N3R

The MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 400D 3 Phase Energy Efficient Isolation Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 provides increased reliablity and protection against critical equipment failures. Equipped with a voltage and current meter on the secondary side, the lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 225 kVA, the MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 isolation transformer is a three phase unit with a primary voltage of 400V Delta. It also provides a secondary voltage of 230Y/133V Wye-N. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. Operators may access a voltage and current meter on the secondary side of the transformer. The electrical meter is suitable for measuring current draw and total utility. For protecting connected/sensitive equipment down stream, the meter can also be used to monitor voltage output levels. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be floor mounted. The unit also features 220¡C insulation with a 150¡C temperature rise and is rated IP24. Benefits: The MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 isolation transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This isolation transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Integrated floor brackets make installation fast and easy and the offset outward facing floor installation holes allow for easy power tool access. Safety: The MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 is an isolation transformer which means that it provides operators with an increased level of protection against electric shock. An isolation transformer can also suppress electrical noise in sensitive devices and transfer power between two circuits which must not be connected. The MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 achieves these safety features by seperating or "isolating" the powered device from the power source and insulation between the primary and secondary power sources. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-DOE16-3P-400D-225KVA-230Y.133-N3R-MOD1 Isolation Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60Hz ANN Cooling kVA: 225 IP24 Rated Primary Voltage: 400 V Delta Isolation Transformer Taps: FCAN: 1 @ 5% FCBN: 2 @ 5% Secondary Voltage: 230Y/133 V Wye-N Secondary Meter: Voltage and Current Winding Material: Aluminum Insulation: 220¡C Temperature Rise: 150¡C Impedance (Std): - Seismic: Yes Sound Level: Meets NEMA ST-20 Standards Primary Termination: - Secondary Termination: - Special Orders- Requirements Enclosure Material: NEMA Type 3R Heavy Duty Ventilated Contact us for special requirements Finish: ANSI 61 Grey, UL50 Finish Phone: 1-214-616-6180 Dimensions: 46"H x 35"W x 37"D Toll Free: 888-325-4448 Weight: 1430 lbs Fax: 1-903-498-3364 Mounting: Floor Mount E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* -Scroll Down to Purchase-