Larson Electronics 21W Class 1 Division 2 LED Fixture - 3' Low Profile Light Strip - 120-240V AC/DC High Voltage

Buy American Compliant The HAL-36-IPS-LED-1227 from Larson Electronics is a low profile hazardous location lighting solution approved for Class I Division 2 environments and UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 2,625 lumens, operates on 120/240V AC and is suitable for a variety of applications. The HAL-36-IPS-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class I Division 2 compliance is required. This low profile hazardous location LED strip light can be operated on 120/240V AC electrical current and includes 6 feet of connecting cord with an explosion proof cord cap or flying leads. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to low pressure water jets from all directions and sealed against dust penetration. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. Once installed, operators can rotate the light fixture side to side to position the light output as needed. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: This explosion proof LED light is equipped with 6 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur. Durability: The HAL-36-IPS-LED-1227 hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing ingress protection against dusts, and protection against low pressure jets of water from all directions, such as wash-down areas. This design is weatherproof, suitable for indoor or outdoor applications, and ideal for areas where wet, damp, or dusty conditions are commonly encountered. The LEDs in this linear light are Cree LEDs that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 125 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. This LED light produces 2,625 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than incandescent, halogen, or fluorescent light fixtures. Mounting: Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 36 inches in length, 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed. Wiring/Power: This light is universal voltage capable and can be operated with 120-240V AC. Each strip light is equipped with 6 feet of 16/3 SOOW cable terminated in an explosion proof cord cap or flying leads for making power connections. Versatility: The HAL-36-IPS-LED-1227 is approved for Class I Division 2 groups A, B, C and D locations. This unit carries an IP65 water resistant rating ensuring protection against ingress from dusts, dirt, and protection against light water jets sprayed directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-36-IPS-LED-1227 Hazardous Location LED Lighting Ratings Listing: United States - Canada Listed for United States and Canada Lamp Type: LED Class I Division 2 Groups A, B, C, D Dimensions: 36"L x 2.68"W x 1.69"D CSA 22.2 No. 250.0 Weight: 2.1 lbs | 0.9 k g UL 1598 Voltage: 120-240V AC IP65 Ingress Protection Total Watts: 21W T3 Temperature Rating Total Lumens: 2,625 70% Lumen Retention after 50,000 Hours Luminous Efficacy: 125 Lm/W Factory Sealed Light Fixture Lamp Life: 50,000+ Hours Color Temp: 5000K Color Rendering Index: >75 CRI Beam Angle: 30¡ Spot or 100¡ Flood Lighting Configuration: Spot or Flood Pattern Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.18A @ 120V, 0.09 @ 240V, 0.08 @ 277V Ambient Operating Temp Range: -40¡C to +60¡C Operating Temp Rating: T3 Housing Material: Extruded Aluminum Housing Finish: Powder Coated - Black Lens Material: Polycarbonate Special Orders- Requirements Mounting: Adjustable Swivel Mount Surface Bracket Contact us for special requirements Wiring: 6` 16/3 SOOW w/ Explosion Proof Cord Cap Toll Free: 888-325-4448 Cord Cap Options: 5-15P, 5-20P, 6-20P or Flying Leads Warranty: Yes - 5 Years* - 10 Year / 100,000 Lumen Available** E-mail: [email protected] Scroll Down to Purchase-