Larson Electronics 15W Explosion Proof LED Strobe Light - High Voltage DC - 110V DC - 4Hz Flash Rate - CIDI - IP67

Made in Texas The EPSLED-80-110VDC Explosion Proof LED Strobe Light from Larson Electronics is NRTL Certified to UL rated Class 1 Division 1, Groups C, D, paint spray both approved, and produces 4 flashes per second. Water proof and IP67 rated , this LED equipped light is pendant, ceiling, or wall mounted, and available with several color and voltage options. The powerful and durable EPSLED-80-110VDC explosion proof LED strobe light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable strobe light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and NRTL Certified to UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with red, blue, green, amber, purple and white flash colors and operates on 110V DC. Click Photo to Enlarge This hazardous area strobe light carries a T3C temperature rating and is NRTL Certified to UL Listed Class 1, Groups C and D, Class 2, Groups E and F, and Class III, Groups E, F and G. This strobe light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through or 3/4" hub. Bulb Included Click Photo to Enlarge Amber Bulb Configuration The 10 watt LED lamp in this unit offers exceptional power and a 50,000+ hour life span and is energized by leads which pass through sealing compound that separates the lamp chamber from the wiring compartment. The LED lamp assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. The LED lamp in this strobe light offers a 50,000+ hour lifespan. The unit shown is pendant mount, and we offer ceiling and wall mount versions as well for added installation versatility. Wall Mount Ceiling Mount Pendant Mount Stanchion Mount Specifications / Additional Information EPSLED-80-110VDC Explosion Proof LED Strobe Light Ratings/Features Lamp Type: LED Class I, Divisions 1 & 2, Groups C,D Dimensions: from specs Class I, Zones 1 & 2, Groups llB, llA Weight: 9lbs Class II, Divisions 1 & 2, Groups E,F,G Voltage: 110V DC Class III, Divisions 1 & 2 Total Watts: 10W NRTL Certified to UL-844 Lumens: 1050 NRTL Certified to UL-1598 Luminous Efficacy: 105 lm/w NRTL Certified to UL Marine Type Lamp Life Expectancy: 50,000+ Hours Certified to CSA C22.2 no. 137-M1981 Color: Red, Blue, Green, Amber, Purple or White NEMA 3, 4, 4X, 7CD, 9EFG Beam Angle: 110¼ Suitable for wet locations Lighting Configuration: Strobing Flash Factory Sealed Light Fixture Strobe Count: from specs Power Efficacy: >95% Power Factor: >0.9 Amp Draw: 0.08A @ 120V, 0.04A @ 240V, 0.8A @ 12V, 0.4A @ 24V Ambient Operating Temp Range: -50¡C to +65¡C Operating Temp Rating: T3C Housing Material: Copper Free Cast Aluminum Special Orders- Requirements Housing Finish: Epoxy Powder Coated Contact us for special requirements Lens Material: Hardened Borosilicate Glass Toll Free: 888-325-4448 Mounting: Wall, Pendant, Ceiling, or Stanchion Wiring Hub: 3/4" NPT (1-1/4" NPT Stanchion) E-mail: [email protected] Down to Purchase