Larson Electronics 15KVA Temporary Power Distribution - 480 Volt - (1) 240V 30A & (6) 120v GFCI Outlets - 24x24 Frame

Made in the USA The Larson Electronics MGL15-480-120-1X240.30-6X120.20-24X24 Temporary Power Distribution System converts 480VAC current to single phase 120VAC and 240VAC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications, with a fully potted transformer and NEMA 3R load center. This unit is capable of passing through 24" by 24" openings, features a built in cord wrap for customer provided cable and a top located eyelet for picking. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGL15-480-120-1X240.30-6X120.20-24X24 temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 480v, 60hz which it then steps down to 1ph 120/240VAC. The power distribution system on this portable substation makes 120VAC available via six 20-amp, 125v GFCI protected duplex 5-20 receptacles and 240VAC via one 30-amp, 250v L6-30R receptacle. All receptacle device boxes are industrial die cast malleable iron construction and feature rigid raceways between each device box. Description: This dolly style cart power distribution system is unique in that it can fit through a 24-inch square opening. Equipped with a 15KVA potted Nema 3R transformer, this system takes 480V on the primary side and converts it to 120/240 single phase power. Operators can access this single phase power via six 120 Volt, 20-amp 5-20 outlets with weatherproof covers and one 240 Volt, 30-amp L6-30R outlet. A cord wrap is built into the frame, allowing operators to store up to 200` of operator provided cable on this unit. 10-feet of 8/3 SOOW cable provides 480 Volt service. A 60-amp fusible disconnect protects the 15KVA potter transformer. The transformer feeds a 100-amp main lug panel that includes one 30-amp 250V breaker and six 20-amp 125V breakers. The breakers feed an L6-30R and six 5-20 receptacles, respectively. This wheeled unit sits on a powder coated steel frame with run-flat wheels. Operators tilt the unit back to maneuver the unit and place it upright to stabilize the system. Operators can lay the unit parallel to the ground and pass this power distribution system through a 24-inch square man-way. This power distribution system measures 23 inches square by 56 inches tall. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift pickeye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva, and can be equipped with skids or trailer mounted. Applications: This power distribution system is UL 1640 and NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These temporary power distribution systems are popularly used for industrial applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL15-480-120-1X240.30-6X120.20-24X24 Temporary Power Distribution System Ratings Line In: 480V via 10’ 8/3 SOOW UL 1640 Portable Power-Distribution Equipment Disconnect: 480V 3PH 60A fused @ 40A N3R NEMA 3R Indoor or Outdoor Use Transformer: 15KVA 60HZ 480-120/240 1PH N3R Made in the USA Secondary Panel: 120/240V 1PH 100A MLO N3R Secondary Panel Breakers: 1 X 250V 30A and 6 X 125V, 20A Secondary Panel Outlets: 1 X L6-30R and 6 X 5-20R-GFCI All w/ weather proof covers Form Factor: Powder coated steel frame, dolly cart style, w/ 10" rubber wheels and top mount center pickeye Dimensions: 22"-W x 22"-D x 56"-H Weight: 275lbs Special Orders- Requirements Features: Contact us for special requirements Maximum Primary OCP: 40A @ 480V Toll Free: 888-325-4448 Maximum Secondary Output: 62.5A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase