Larson Electronics 120 Watt LED Blue Light Emitter -2 Hz Strobe Rate - 9-42 Volts DC - Extreme Environment

Buy American Compliant The Larson Electronics LEDLB-40X2E-BLUE-STRB Blue LED Strobing Light Bar offers high light output and extreme durability combined with versatile mounting and power options. This IP68 rated LED light bar strobes at a rate of 2 Hz, is waterproof to three meters and produces 7,200 lumens while drawing only 120 watts of power @ 10 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining operations. Additionally, the LEDLB-40X2E-BLUE-STRB features an external power source that allows the warning light to have the ability to strobe The LEDLB-40X2E-BLUE-STRB Blue LED strobing light bar from Larson Electronics produces a 1300` long by 180` wide light beam with 7,200 lumens of bright light while drawing only 120 watts @ 10 amps from a 12 volt electrical system. Forty CREE EZBright¨ three watt LEDs are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. This specially configured LED emitter is designed to produce strobing blue light at a rate of 2 Hz. The LEDLB-40X2E-BLUE-STRB features a durable inline polycase which holds the external power source that allows this LED light bar to strobe. There is 5` of line in cable terminated in and a 15` wiring harness with weatheproof Deustch connectors between the light and the external power source. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. LEDLB-40X2E-BLUE-STRB 35¡ Flood Beam (Opt) LEDLB-40X2E-BLUE-STRB 10¡ Spot Beam (Stnd) LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon¨ Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42V DC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don`t always operate with 12 volts and external generators, transformers or inverters are impractical. Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the `E` part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon¨ LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme. Mounting:Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. NOTE: In this LED emitter light bar model, an additional mounting option is provided. The adjustable, shock insulated mounts are attached to a simple, inverted u-bracket type mount. The LED light bar can then be mounted via a single 3/8 bolt through the center of the bracket. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDLB-40X2E-BLUE-STRB LED Strobing Light Bar LEDLB LED Features LEDs: 40 Edixeon¨ 3 Watt LED Emitters Edixeon¨ 3 Watt LED Emitters Dimensions: 12.25"L x 5.27"H x 3.56"D LEDs Driven At 80% Watts: 120 -40¡C ~ +80¡C Operating Temp Range Voltage: 9-42V DC RoHS Compliant Spot Beam: 1300`L x 180`W 70% Lumen Retention @ 65,000 hours Flood Beam: 420`L x 380`W Ambient Op Temp -40¡C to +125¡C Weight: 15 Lbs IP68 Rated Waterproof to 3 Meters Lighting Configuration: 10¡ Spot or 35¡ Flood CE Certified Strobe Rate: 2 Hz Mounting: Inverted U-Bracket Wiring: 5` Line In Cable w/ Flying Leads, 15` Wiring Harness w/ Deutsch connectors Amps: 10 (on 12 volts) 5 (on 24 volts) Lumens: 7,200 LED Light Color: 6000K (White) & Blue LED Life Expectancy: 50,000 hours Special Orders- Requirements Optics Efficiency: 90% Contact us for special requirements Materials: Aluminum Housing, Polycarbonate Lens Toll Free: 1-800-369-6671 Housing Colors: Black or White Intl: 1-903-270-1187 Lux @ 10` Increments: 10` - 9,000, 20` - 2,450, 30` - 1,075, 40` - 650, 50` - 428, 60` - 290, 70` - 222, 80` - 170, 90` - 136, 100` - 112, 110` - 92 E-mail:[email protected] Down to Purchase-