Larson Electronics 112.5 KVA Transformer Power Distribution - 600A Main Breaker - 480V to 208Y/120 - 4x120V 20A Outlets

Made in Texas The Larson Electronics MGS-480.600A-112.5KVA-208Y.120V-225A-4X20A heavy duty 3-phase power distribution substation gives operators the ability to draw input voltage from 480V power sources through a 600 amp main breaker. The unit`s 112.5 KVA transformer then steps down the input voltage to 208Y/120V. On the secondary panel side, operators can plug in up to four 20-amp, 120V devices into the GFCI protected outlets. The secondary panel is protected by a 225 amp main breaker, twelve 20 amp line-out breakers and one 125 amp line-out breaker. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* This portable power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant maintenance, equipment installations and repairs. On the primary side, a 600-amp main lug 480/277V panel provides protection for the input voltage source and the 112.5 KVA 480-120/208Y transformer. On the secondary side, a 225-amp main breaker 120/208Y panel provides protection for four 125V rated, 20-amp, GFI protected 5-20R outlets with weatherproof covers. The secondary panel also has a 125 amp line-out breaker. The panels and transformer are NEMA 3R rated. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer`s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~~Please check all motor loads for dual rated motors that will work 208 or 240. ~~ Specifications / Additional Information MGS-480.600A-112.5KVA-208Y.120V-225A-4X20A Power Distribution System Ratings Line In: 480V via Operator Provided Wiring UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V AC NEMA 3R Indoor or Outdoor Use Primary Panel: (1) 600 Amp Breaker Made in the USA Transformer: 112.5KVA 480-120/208Y 3P N3R Secondary Voltage: 120VAC/208Y VAC Secondary Panel: 225A 3P MCB NEMA 3R Panel Secondary Protection: (1) 208V 125A breaker & (12) 120V 20A breakers Secondary Receptacles: (4) 125V 20A 5-20R GFCI w/ Weatherproof Covers Transportation: Skid pockets, locking casters, and top pick eye Special Orders- Requirements Form Factor: 48"-L X 44"-W X 72"-H Contact us for special requirements Weight: ~1027 lbs Toll Free: 888-325-4448 Max Primary OCP: 600 amps @ 480V Max Secondary OCP: 225 amps @ 208V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase