Larson Electronics 100 kVA Pad Mount Transformer - 460V AC Primary - SV1 Secondary - Oil Cooled - Single Phase

The MT-PDO-1P-460V-100KVA-SV1-N3R 460V 1 Phase Energy Efficient Pad Mount Oil Cooled Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-PDO-1P-460V-100KVA-SV1-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 100kVA, the MT-PDO-1P-460V-100KVA-SV1-N3R transformer is a three phase unit with a primary voltage of 460V AC (440-480V AC input range). It also provides a selectable secondary voltage of 16/24/25/27/34.5kV AC. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The NEMA Type 6 enclosure is IP66 rated and makes the unit suitable for both indoor and outdoor applications. This unit is be pad mounted. The unit also features mineral oil cooling, a 40¡C temperature rise and is rated IP66. The MT-PDO-1P-460V-100KVA-SV1-N3R is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PDO-1P-460V-100KVA-SV1-N3R pad mount oil cooled transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PDO-1P-460V-100KVA-SV1-N3R Pad Mount Transformer Ratings Phase: Single Phase Listed for United States and Canada Frequency: 60Hz ONAN Cooling Class kVA: 100 IP66 Rated Primary Voltage: 460V AC (440-480V AC Input Range Mineral Oil Filled Primary Connection: 3" NPT Fitting for Incoming Power Feeds; (2) 1" NPT Fittings for LV Feedback Wires Secondary Voltage: 16/24/25/27/34.5kV AC Secondary Connection: 2" 150 lb RF Flange With Cameron Supplied TE Bushing Tertiary Winding: 100V AC, 100 VA Fused at 1.25 Amps (Voltage Feedback) CT Ratio: 300:5 (Current Feedback) Reactance: 100% Accessories: No-Load Tap Changer - 5 Position - Lockable Accessories: (1) Pressure Relief Valves - 2 PSI Accessories: Temperature Gauge Accessories: Temperature Switch (In Main Oil Tank) Accessories: Oil Level Gauge Accessories: Drain Valve Accessories: Lifting Provisions (4 Places) Accessories: Pressure Relief Valve Accessories: Ground Pad - 2 Places Winding Material: Aluminum Temperature Class: T4 Cooling Class: ONAN Insulating Fluid: Cross 206 Mineral Oil per IEC 60296 Temperature Rise: 40¡C Ambient Temperature Rating: -45¡C to +55¡C LV Junction Box: Painted Carbon Steel W/ 316 SS Cover LV Box IP Rating: IP66 Tank Construction: 7 Gauge Tank Walls, 10 Gauge 316 SS Tank Lid, Internals Braced to Tank Wall Special Orders- Requirements Paint: Standard 2 Coat Paint System - ASA 61 Gray Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: 4900 lbs Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-