The HAL-CRNM-LED7W-C Class 1, Division 2 Vaporproof Colored LED Light from Larson Electronics is UL rated Class 1 Division 2 Groups A,B,C,D. This waterproof LED equipped light is pendant, ceiling, or wall mounted, and available in 120-277V AC, 12V DC or 24V DC voltage configurations. The powerful and durable HAL-CRNM-LED7W-C vaporproof colored LED light from Larson Electronics is ideal for industrial applications, hazardous work spaces, and areas where gases and vapors may be present and a powerful and durable general purpose light solution is needed. The lamp housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globe, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED lamp has a 50,000 hour operational life and is available in 120-277V AC, 12V DC or 24V DC configurations for high or low voltage operation. This hazardous area LED light carries a T2D temperature rating and has a -29C to 40C (-29F to 104F) operating temp range. This LED light carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. Wiring is through 3/4" NPT hubs. This LED light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas. The LED lamp in this unit offers exceptional power, a 50,000+ hour life span, and is protected by a Pyrex globe and polycarboate globe guard. The LED lamp selection in this wet area light offers red, amber, green, blue, or white color. Light output with this explosion proof LED light is brighter than a 100W incandescent bulb when measured with an Extech light meter at 10 feet. The unit shown is ceiling mount, and we offer pendant and wall mount versions as well for added installation versatility. The HAL-CRNM-LED7W-C is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered. Voltages: 120-277VAC 50/60Hz or 12-24VDCDraws 0.4A average @ 12VDC 120VAC draws 0.04A average.Wiring is through 3/4" NPT hubs. Temp Code: Class 1 T2D 215¡C¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Specifications / Additional Information HAL-CRNM-LED7W-C ETL Ratings Lamp Type: LED Class 1,Division 2 Groups A,B,C,D Lamp Dimensions: 5.94" OD , 9.60" Height (Ceiling Mount) UL 595: Marine Outside Type Lamp Weight:N/A UL 844: Class1 Division 2 Hazardous Location Hub: 3/4" NPT UL Listed to CSA 22.2-137 Lumens: Varies on color selection NEMA 4X Voltage: 120-277V AC, 12V DC or 24V DC -29C to 40C (-29F to 104F) Op Temp Lighting Configuration: Steady Burn USCG Accepted Mounting:Ceiling, Wall, Pendant CSA Approved Temp Rating: T2D New York City Department of Buildings approved LED Lamp Watts: 7 Watts (10W for white) Material meets UL 94-V-0 standards for flame retardancy Strobe Count: Non Strobing CSA Standard for Luminaires Wiring: 3/4 inch Hub UL 1598A Lamp Life: 50,000+ Hours UL for Safety Supplement Requirements for Luminaires for Installation on Marine Vessels Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Scroll Down to Purchase
Larson Electronics Vaporproof Colored LED Light - 7 Watts - Non-Metallic - Corrosion Resistant - Class 1, Division 2
Larson Electronics
- SKU:
- HAL-CRNM-LED7W-C
- Weight:
- 0.00 LBS