Image coming soon

Larson Electronics *RENTAL* Explosion Proof LED String Lights - 5, Class I & 2, Div. I LED Handlamps - 120V -*RENTAL*

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
Made in the USA This unit is for rentals The Larson Electronics RNT-EPL-SL-5-LED Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection. Click here to see the Incandescent version of this light This explosion proof string light set from Larson Electronics contains a total of five 10 watt work lights equipped with aluminum hooks and connected in series along 40 feet of 12/3 SEOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 14/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated in a Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. A 10 foot tail section of main SOOW cord is included to allow ample length for connection to power sources. 10 Watt LED Bulb Molded T Connector w/ Hook Ring 25` whip w/ EXP Plug Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge 100 Watt Incandescent Bulb With the RNT-EPL-SL-5-LED Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This explosion proof LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment. This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space. Click Photos to Enlarge 5-15 Straight Blade Plug 6-20 Straight Blade Plug This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277V AC or 11-25V AC/DC, please choose your configuration below. A 10` input whip terminated in an explosion proof cord cap completes the explosion proof protection of this string light. Cord cap options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Stringer Energy Consumption Comparison Incandescent CFL LED Wattage 500 watts 130 watts 50 watts Amp Draw @ 120V AC 4.17 amps 1.09 amps 0.42 amps Amp Draw @ 277V AC 1.8 amps 0.47 amps 0.18 amps Amp Draw @ 12V DC 41.67 amps 10.84 amps 4.17 amps Amp Draw @ 24V DC 20.84 amps 5.42 amps 2.08 amps Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours Color Temperature 2800K 4300K 6000K Operation cost per year(8hs/day @ 11c/kWh) $160.6 $41.76 $16.06 Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. Total of (5) 10 watt LED Lamps.4. Non-sparking aluminum construction.5. UL Class 1 Div 1 Class 2 Div17. 120-277V AC or 11-25V AC/DC Operation8. SEOOW cable.9. Aluminum Hooks for Convenient Placement. 50 watts of LED illuminationNon-sparking aluminum housingsLight weight mold T JunctionsCast aluminum guard prevent lamp or globe damageTempered Soda-Lime Glass Lamp GlobeIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operation12/3 SEOOW Abrasion Resistant Cable Specifications / Additional Information RNT-EPL-SL-5-LED U.L. Ratings Listing: United States Class 1, Divisions 1 & 2, Groups C, D Dimensions- Each Lamp: L-16.5" Diam-5" Class 2, Divisions 1 & 2, Groups, F, G Single Lamp Weight: 6 lbs Class 1, Zone 1, Group IIB Total Weight: 35 lbs NEMA 4X Voltage: 120-277V AC or 11-25V AC/DC Total Watts: 50 Single Lamp Watt: 10 watts Total Lumens: 5,250 Single Lamp Lumens: 1,050 Lamp Life: 50,000+ Hours Luminous Efficacy: 105 Lm/W Color Temp: 5600K Amps: 0.42 120V AC Globe Guard Material: Copper Free Cast Aluminum Globe Material: Hardened Borosilicate Glass Handle Material: Rubber Mounting: Handheld / Hanging via Aluminum Hooks Handlamp Wiring: 3` 14/3 SEOOW Cable Drop from Backbone Special Orders- Requirements Wiring: 50` 12/3 SEOOW Cable - 10` between lamps - 10` input whip Contact us for special requirements Cord Cap: 5-15 or 6-20 Explosion Proof Plug Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily E-mail: [email protected] In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-SL-5-LED Monthly..$286.00 USDWeekly....$191.00 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed.