Larson Electronics *RENTAL* Explosion Proof LED Fixtures - Paint Spray Booth - Class I, Div. I - *RENTAL*

Made in Texas This unit is for rentals. The Larson Electronics RNT-EPL-24-2L-LED Explosion Proof LED Light Fixture is U.S./Canada UL Listed Class 1 Division 1, Class II Division 1, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical/petrochemical vapors or pulverized dust exist or have the potential to exist. This 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs. The RNT-EPL-24-2L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 15% more illumination at 8 feet as compared to standard T5-HO lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T5-HOs and have consistently surprised many of our customers with their unexpectedly high light output levels.This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T5-HO bulbs. This fixture carries a T6 temperature rating and is UL Listed Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G. We have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LEDT8-24-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 14 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 1,750 lumens at 125 lumens per watt, for a combined 3,500 total lumen light output. An EPL-24-2L-T8 explosion proof fluorescent light, with a combined total of 34 watts, draws 0.29 amps at 120 volts AC. This LED version of the same light, with a total of 28 watts, draws only 0.23 amps at 120 volts AC. The EPL-48-2L-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power. Energy Consumption Comparison T5HO T8 LED Wattage 48 watts 34 watts 28 watts Amp Draw @ 120V AC 0.40 amps 0.29 amps 0.23 amps Amp Draw @ 220V AC 0.22 amps 0.16 amps 0.13 amps Amp Draw @ 240V AC 0.20 amps 0.14 amps 0.12 amps Amp Draw @ 277V AC 0.18 amps 0.13 amps 0.10 amps Amp Draw @ 12V DC 4 amps 2.84 amps 2.34 amps Amp Draw @ 24V DC 2 amps 1.42 amps 1.17 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Operation cost per year(12hs/day @ 12c/kWh) $25.23 $14.87 $14.72 Our RNT-EPL-24-2L-LED LED light fixture is U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations. Mounting Options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations. Surface Mount (Standard) Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Pendant Mount (Optional) Click Photo to Enlarge 3 Conduit Positions Click Photo to Enlarge Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture. Suggested Applications:Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants. Made in USA Quality Superior LED Benefits 1. Each unit dialectrically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap. 7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information RNT-EPL-24-2L-LED Explosion Proof U.L. Ratings UL Listing: United States - Canada Class 1 Division 1, Groups C and D Dimensions: W-11.25" L-27.5" H-8.5 " Class 1 Division 2, Group A,B,C,D Weight: 32 Lbs Class II, Division 1& 2, Groups E, F G Total Watts: 30 watts UL 844, 924 Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz UL 1598 Marine Type Low Voltage (Optional): 12-24V DC UL 595 Outdoor Marine Type (Saltwater) LED Lamp Life Expectancy: 50,000+ Hours UL Certified- U.S./Canadian Safety Standards Efficiency: 90 Lumens per Watt Operating Temp Range: T6 rated -40C to 85C Beam Angle: 150 degrees Special Orders- Requirements Color Temp: 5300K- Contact us for special requirements Mounting: Bracket Standard - Pendant Optional Wiring Hub: 1/2 inch threaded Toll Free: 1-800-369-6671 Rental Type: Monthly, Weekly, Daily Intl: 1-903-270-1187 E-mail: [email protected] U.L Approval: U.S Certificate Canada Certificate