Larson Electronics Power Distribution - 25 KVA Transformer - 480V Primary - 120/240Y Secondary - 2x240V & 4x120V Outlet

Made in the USA This Larson Electronics 25KVA power distribution system offers operators several options for powering equipment with different voltage requirements. On the primary side, this power distribution substation has two 5-foot whips (#6 Type W) protected by 50-amp breakers. The 25KVA transformer steps 480V down to 120/240 single phase and feeds a secondary panel with two 30-amp 240VAC L6-30 outlets and four 5-20 GFI outlets for 120 VAC equipment. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The system derives 480V power via a 10-foot 1 AWG line cable. The 480VAC power feeds a 200-amp main breaker NEMA 3R panel that contains two 50-amp breakers and one 40-amp breaker. Each 50-amp breaker protects a 5-foot #6 Type W cable that is blunt cut at the end. Operators can terminate each whip their own connector. A 40-amp breaker protects the 25KVA NEMA 3R transformer that steps the 480 voltage down to single phase 120/240VAC. The transformer feeds a 100-amp main breaker secondary panel. Two 30-amp breakers protect two 2-pole L6-30 receptacles and four 20-amp breakers protect the 20-amp, 120V 5-20 GFI outlets. All the secondary receptacles include weatherproof covers. Click Photo to Enlarge Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, 8" locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Units are available up to 150kva and can be equipped with skids or trailer mounted. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480.2X5-25K-2X240.30-4X120.20 Power Distribution Substation Ratings Line In: Three Phase 480 VAC with 10` of 1 AWG UL 1640 Portable Power-Distribution Equipment Primary Protection: 200-amp 480V main breaker panel NEMA 3R Indoor or Outdoor Use Primary connectivity: (2) 5` #6 Type W cables, blunt cut, protected by (2) 50-amp breakers Made in the USA Transformer KVA: 25 KVA NEMA 3R 480-120/240 1P Secondary Protection: 100-amp main breaker panel Secondary Connectivity: (2) L6-30 receptacles with waterproof covers and (4) L5-20 GFI with waterproof covers Dimensions: W-48" X L-48" X H-55" Form Factor: Powder coated/painted steel frame with steel plate base Transport: 8 inch locking polyurethane casters, forklift access and pick eye Special Orders- Requirements Ground: Mechanical Ground Contact us for special requirements Weight:450lbs Toll Free: 888-325-4448 American Made E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase