Larson Electronics Mobile Power Distribution Center - 120/240V 1PH, 100A MCB - (12) 5-20R GFCI Receptacles - 25' Cord

The Larson Electronics MDC-120.240-100MB-1X2P.60A-3X2P.30A-12X1P.20A Mobile Power Distribution System accepts 120/240V single phase electrical current on the primary side and provides 120V via twelve 5-20R GFCI duplex receptacles on the secondary side. This unit provides operators the ability to safely tap into and distribute 120/240V AC power from a variety of sources including generators and direct grid power. The cart-mounted, portable spiderbox is suitable for outdoor applications. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, SPIDERBOX, OR SUBSTATIONS* The MDC-120.240-100MB-1X2P.60A-3X2P.30A-12X1P.20A temporary power distribution system offers a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. The portable spiderbox is designed to operate with single phase 120/240V AC. The power distribution system on this portable substation makes 120V AC available via twelve 20-amp 125V 5-20R GFCI duplex receptacles, which are protected by weatherproof covers. 5-20 120V, GFCI Receptacle Breaker Panel Cord Reel Side Profile Operation: A 25` #4 Type W line-in cord brings single phase 120/240V AC into the NEMA 3R 100-amp 120/240V single phase main circuit breaker panel. The main circuit breaker panel contains twelve 20-amp 1-pole breakers protecting twelve 20-amp 125V 5-20R GFCI duplex receptacles. This panel also features one 60-amp 2-pole breaker and three 30-amp 2-pole breakers. The load center is mounted within NEMA 3R enclosure. Protective Construction: The distribution assembly is mounted to a standard upright steel dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat tires and a cart style mounting platform provides easier substation mobility. This temporary power distribution spiderbox can be modified to meet the needs of job-site receptacle requirements. Full power distribution units are available up to 150kva and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and industrial operations. Larson Electronics is a manufacturer and can build portable spiderbox systems to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MDC-120.240-100MB-1X2P.60A-3X2P.30A-12X1P.20A Mobile Power Distribution Center Ratings Line In: 25` #4 Type W Cord UL 1640 Portable Power-Distribution Equipment Voltage: 120/240V AC 1PH NEMA 3R Indoor or Outdoor Use Panel: 100A 120/240V 1PH MCB N3R Made in the USA Breakers: (1) 60A 2P, (3) 30A 2P, (12) 20A 1P [125V] Output Receptacles: (12) 20A 5-20R GFCI Duplex [125V] Protection: GFCI, Circuit Breakers, Weatherproof Covers Special Orders- Requirements Grounding: Single Ground Lug Contact us for special requirements Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Toll Free: 888-325-4448 Dimensions: 24"-L x 18"-W X 52"-H Intl: 1-214-616-6180 Weight: 65lbs Fax: 1-903-498-3364 Max Primary OCP: 100A @ 240V E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase