Larson Electronics IND-LP-SS-48-5L-UVC 162.5W Industrial UVC Fluorescent Fixture - (5) 4' UV Lamps - Zinc Coated Hubs/Surface Mount

162.5W Industrial UVC Fluorescent Fixture - (5) 4' UV Lamps - Zinc Coated Hubs/Surface Mount This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-LP-SS-48-5L-UVC UV Fluorescent Fixture provides UVC illumination in industrial facilities. This 130-watt unit features five, 4-foot UV fluorescent lamps, housed in a 304 stainless steel housing. The luminary caters to surface mounting and operates on 120-277V AC, 50/60 Hz. This unit is equipped with a motion sensor that automatically shuts the unit down when motion is detected. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.ÊClick here to learn more about UVC and the corona virus* The IND-LP-SS-48-5L-UVC is a fluorescent-based UV lighting system for industrial facilities requiring effective sanitation or disinfection. Consisting of five, 4-foot fluorescent UV lamps, the 162.5-watt unit offers UVC output with a wavelength range of 200nm to 280nm (wavelength of 254 nm). This UV fixture operates on 120-277V AC, 50/60 Hz (ballast voltage) and features a G13 medium bi-pin cap base. The UV lamps contain an 8,000-hour useful lifespan. The UV light's housing is constructed of 304 stainless steel, with zinc-coated hubs. One lighting ballast is located in a gasketed ballast enclosure at the back of the UV fixture. UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility.Ê Mounting/Wiring: The IND-LP-SS-48-5L-UVC features a surface mounting system. Surface mounting brackets on the housing facilitate a low profile wall or ceiling mount, making it suitable for installations in tight spaces. Power connections to the UV unit can be completed via two accessible, threaded wiring hubs (1/2" or 3/4"). Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: Germicidal, water purification, disinfection, food processing, air disinfection, pharmaceuticals, biotechnology and more. Call 888-325-4448 to place your Larson Electronics order online today!