Larson Electronics IND-AR-UML-FUVC-MP-6-1L-V1-120V-10C 10W Far-UV Sanitation Light - (1) 222 nm UVC Microplasma Board - Wall Mount w/ (2) 6" Arms - 10' Cord

10W Far-UV Sanitation Light - (1) 222 nm UVC Microplasma Board - Wall Mount w/ (2) 6" Arms - 10' Cord This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-AR-UML-FUVC-MP-6-1L-V1-120V-10C Far-UV Sanitation Light disinfects 99% of viruses, bacteria, mold and spores on surfaces and in the air within occupied areas. Equipped with two 6" arms, this eye and skin safe disinfection unit uses one 10-watt microplasma board that emits far-UV 222 nm germicidal light. The UV disinfection light comes with an enclosed driver and is compatible with wall mounting (above eye level) installations. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.ÊClick here to learn more about UVC and the corona virus* The IND-AR-UML-FUVC-MP-6-1L-V1-120V-10CÊUV sanitation fixture is a powerful lighting solution for rooms and occupied areas. This 10-watt unit consists of one microplasma board that provides 222nm far UV-C output. Equipped with an expected lifespan of 6,000+ hours, the light emits a flood beam pattern and is replaceable. The far-UV unit is capable of achieving up to 3 log (99.9%) cumulative disinfection per day. U-reflectors located at the end of the arms enhance light distribution by reflecting UV rays downwards. Far-UV 222 nm light is considered to be eye and skin safe for humans, allowing the lamps to be used in occupied areas safely with minimum risk. The 222 nm wavelength does not penetrate the cornea of the eye and cannot impose corneal impairment. Additionally, this UV band is blocked by the top layer of skin (stratum corneum) which protects underlying cells from damage. Exposure to far-UV 222 nm lamp does not cause skin inflammation or swelling. Due to these safety benefits, extensive protective clothing is not required when using this type of sanitation light in occupied areas. Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide Òinstant-onÓ startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications. 5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated Flying Leads / Pigtail Wires Wiring: This disinfection light is equipped with 10 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground or NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mounting: The far-UV sanitation fixture is suitable for installation above eye level on walls. Two 6" arms extend the germicidal light outwards from the wall (total 10" extension from the mounting surface) for positioning close to the target area. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: Sanitation, disinfection, rooms, general areas, booths, occupied areas, common areas, air sanitation, surface sanitation and more; kill 99% of viruses, bacteria, mold and spores. Call 888-325-4448 to place your Larson Electronics order online today!