Larson Electronics Hazardous Location LED String Lights - 6 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2

Made in TexasThe Larson Electronics HAL-SL-6-LED Explosion Proof LED String Light set is UL Listed Class I Division 2 Groups A, B, C and D and is ideal for temporary work lighting and inspection activities in hazardous locations requiring explosion proof protection.This 60 watt explosion proof LED string light set from Larson Electronics produces a total combined output of 6,300 lumens of bright white light. Six, 10 watt LED work lights equipped with hanging eye-bolts are connected in series along 50 feet of 14/3 SOOW explosion proof cord. An explosion proof outlet allows these string lights to be connected end to end, allowing operators to add additional lights at the end. The power cord on this unit is terminated in a Class I, Division 1 explosion proof plug on the input lead and an explosion proof receptacle on the output lead for total explosion proof protection. There is no ballast with this LED string light and the housing on each lamp is constructed of non sparking aluminum which helps to keep weight to a minimum while affording good durability. This hazardous location light string is Class I, Division 2 hazardous location environment approved and is ideal for hazardous work areas where a ready source of easily managed lighting is desired. 100 Watt Incandescent Bulb With the HAL-SL-6-LED This unit incorporates six 10 watt LED jelly jar lights connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. Each LED lamp projects 1050 lumens of light, for a combined total of 6,300 lumens from all six. The output of this string light is stronger and of better quality than sets equipped with 100 watt incandescent bulbs, yet it uses only 10% as much electrical current. Unlike the glass lamp design of traditional incandescent and compact fluorescent lamps, these LED lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment.Stringer Energy Consumption Comparison (Single Stringer) IncandescentCFLLEDWattage (single unit)100 watts26 watts10 wattsWattage (total)600 watts156 watts60 wattsAmp Draw @ 120V AC5.00 amps1.30 amps0.50 ampsAmp Draw @ 220V AC2.73 amps0.71 amps0.23 ampsAmp Draw @ 240V AC2.50 amps0.65 amps0.25 ampsAmp Draw @ 24V AC25.00 amps6.5 amps2.50 ampsLamp Life Expectancy1,500 hours8,000 hours 50,000 hoursColor Temperature2800K4300K6000KOperation cost per day(12hs/day @ 12c/kWh)$0.87$0.23$0.09Operation cost per month (12hs/day @ 12c/kWh)$25.92$6.74$2.60Operation cost per year(12hs/day @ 12c/kWh)$315.36$82.00$31.54The lamps in this unit are high efficiency LEDs which require no ballast, so there is no inline lamp hardware to manage. This hazardous location LED string light will operate on any voltage ranging from 120 Volts AC to 277 Volts AC on 50/60 Hz. We also offer this light with 11-25 Volts AC/DC. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug These lights carries a T2D temperature rating and have a -29C to 40C (-29F to 104F) operating temp range. The HAL-SL-6-LED carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. This LED string light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.The LED lamp in this unit offers exceptional power, a 50,000+ hour life span, and is protected by a Pyrex globe and polycarbonate globe guard. The HAL-SL-6-LED is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered.Made in USA QualityLamp Features1. Federal Spec Cord.2. Explosion Proof.3. (6) 10 Watt LED Lamps for 6,300 Total Lumens.4. UL Class I Div. 2 5. 120-277 Volt Operation6. SOOW cable.7. EXP plug and outlet for end to end use 8. Aluminum Hooks for Convenient Placement.Each 10 watt LED light produces 1050 lumensNon-metallic housing50,000 hour LED LampSwivel hook for hanging and hands free operationExplosion proof cordSpecifications / Additional Information HAL-SL-6-LED Hazardous Location LED String LightRatings/ApprovalsListing: United StatesClass I ,Division 2 Groups A,B,C,DLamp Type: LEDUL 595: Marine Dimensions- Each Lamp: 5.94" OD , 9.60" Height UL 844: Class I Division 2 Hazardous LocationTotal Length: 75`UL 1570/1571: Wet LocationsTotal Weight: 85lbsNEMA 4XVoltage: 120-277 Volts 50/60hz AC, 11-25V AC/DCUSCG AcceptedTotal Watts: 60 WattsCSA CertifiedTotal Lumens: 6,300Made in the USALuminous Efficacy: 105 Lm/W Lamp Life: 50,000+ HoursColor Temp: 6000KAmbient Operating Temp Range: -29¡C to 40¡C (-29¡F to 104¡F)Operating Temp Rating: T2DSpecial Orders- RequirementsMounting: Hanging Eye-boltContact us for special requirements Wiring: 85` SOOW Cord - 25` Input Whip - 10` Output WhipToll Free: 888-325-4448 Cord Cap: 5-15 Straight Blade Plug, 5-20 Straight Blade Plug, 6-20 Straight Blade PlugIntl: 1-903-270-1187Warranty: Yes - 3 YearE-mail: [email protected] Scroll Down to Purchase-