Larson Electronics Explosion Proof Electric Inline Axial Fan - 150ft Cord - 15' Conductive Duct - 1/3 HP Engine - C1D1

Made in the USA The Larson Electronics EPF-10P.3-150 Explosion Proof Electric Inline Axial Fan with 21 foot static conductive duct is UL and CUL listed and safely and effectively redirects stale air from hazardous location areas. This fan includes a 15 foot static conductive duct and a shorter 6 foot conductive duct, is designed for portability, and can be linked in series when larger lengths of conductive duct are needed. This explosion proof fan delivers high-performance airflow with a 1,390 overall CFM rating and 973 CFM when fitted with a 25ft. duct and a 90 degree bend. The 1/3 horsepower electric motor runs from standard 115 VAC and pulls 12.6 amps. Added safety features include a prewired explosion proof switch, dual grounding lugs on the steel housing, and 150 feet of cord fitted with a 5-15 straight blade explosion proof plug. Meets UL and Canadian UL safety ratings for Class 1, Division 1, Groups C and D & Class II Division 1, Groups E, F and G. This explosion proof fan is designed for portability and durability with a light weight compact body constructed of powder coated steel and a non-sparking aluminum blower wheel. Rubber coated base feet and an integral carry handle provide easy transport and secure placement when set down on a flat surface. This unit is available with either an 8 inch or 10 inch intake and exhaust flange, and includes a built in automatic reset thermal overload for added protection. Note on Explosion Proof Fans: Can be used as an intake and an exhaust fan. Exhaust Configuration Intake Configuration INCLUDES:1. Hazardous location ventilation fan (blower)2. 15 feet static conductive duct3. 6 feet static conductive duct4. Dust carrier (holds up to 50ft. of duct)5. Universal mount6. Static conductive 90 degree elbow for saddle vent7. Static conductive saddle vent Features: • 1/3 HP electric motor, 115 VAC, 12.6 amp• Explosion-proof switch installed and wired• 8 or 10 inch intake and exhaust flange• 1390 cfm free air delivery• 973 cfm when a 25ft. duct and a 90 degree bend are present while in use.• 72 dbA @ 3ft.• Approved for Class I, Div. 1, Groups C and D and Class II, Div. 1, Groups E, F, G• Aluminum non-sparking blower wheel• Dual grounding lugs installed on steel housing• All Steel, powder coated red with rubber base feet• Automatic reset thermal overload• Carry handle frame• Pre-Wired With 150 Ft. Cord• Pre-wired with a 15 amp explosion proof 5-15 style plug The ducts on this fan consist of single-ply polyester reinforced PVC vinyl fabric hose with an external wear strip reinforced with a spring steel wire helix. The ducting is lightweight for these blower applications and is highly compressible. The retractability of the static conductive duct allows for convenient storage and easy transport in a fraction of its fully extended length and has low friction loss. The wearstrip offers external abrasion resistance, and is listed as YL 94 V-0 flame retardant. Ambient temperature for the fan ranges from -20 degrees to 180 degrees Fahrenheit. Specifications / Additional Information EPF-10P.3Explosion Proof Inline Axial Fan UL and C-UL Listed Air consumption: 38 cfm Class I, Div. 1, Groups C and D Voltage: 115 VAC Class II, Div. 1, Groups E, F, G Amps : 86 Dba12.6 T4 Temp rating -30C to 160C Motor: 1/3 Horsepower Meets UL and Canadian UL Safety Ratings CFM Delivery : 1390 Noise Level: 72 dbA @ 3ft Fan Type: Inline Axial Fan Size: 16”W x 16.75”H x 12.5”D Special Orders- Requirements Wiring: 150 Foot Cord w 5-15 Exp Proof Plug Contact us for special requirements Protection: Dual Lug Ground Body/Automatic Reset Thermal Overload Toll Free: 888-325-4448 Intl: 1-903-498-3364 E-mail: [email protected]