Larson Electronics Explosion Proof 5 Outlet Extension Cord - Five 20 Amp Outlets - 50 Foot SOOW Chemical Resistant Cord

Made in the USA The Larson Electronics EPEXC-5X-12.3-50 50` Explosion Proof Extension Cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 50 feet of 12/3 SOOW explosion proof cord and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with five inline 20 amp, 2-pole 3-wire explosion proof receptacles installed on one end and a standard explosion proof plug installed on the other end. This unit enables multiple connections from a single cord. Click Photos to Enlarge These explosion proof extension cords are preconfigured in 125V (left) or 250V (right). Each unit is equipped with a 20 amp explosion proof cord cap and rated for 20 amps of continual service. The outlets are a twistlock design. The deep recessed contacts in the receptacle housing prevents ordinary and wet location plugs from activating the explosion proof outlets. 125V 5-20P Explosion Proof Straight Blade Plug 250V 6-20P Explosion Proof Straight Blade Plug 125V 5-15/20 Explosion Proof Outlet Outlet accepts 15A and 20A Explosion Proof Plugs Outlet accepts 6-15P and 6-20P Explosion Proof Plugs We offer this unit in a 125V or 250V configuration. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-5X-12.3-50 Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D Dimensions: Cord length-50 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups F and G Configuration: 2 Pole 3 Wire Suitable Plug Cable Diameter: .538” to .639” Wiring: 50` 12/3 SOOW Cable Terminated w/ (1) 5-15P Explosion Proof Straight Blade Plug and (5) 20 Amp Inline Receptacles Voltage: 125 Volts or 250 Volts Receptacle Specs: 5 Inline Receptacle Configuration: 2 Pole 3 Wire Materials: Copper Free Aluminum Dimensions: 3"-W X 5.69"-D X6.13"-H Mating Plugs: ****EPP-15A, EPP-20-A**** Special Orders- Requirements Finish: Epoxy Powder Coat Contact us for special requirements Toll Free: 888-325-4448 U.L. Certification E-mail: [email protected]