Larson Electronics Class 1 Division 2 Emergency ONLY Fluorescent Light - 4' 2 Lamp Emergency Fixture

Made in the USAThe Larson Electronics HALP-EMG-48-2L-113 Hazardous Area Emergency Only Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4C temperatue rating and is specifically designed to handle the rigors of wet and corrosive marine environments. This fixture is equipped with an added battery backup providing 90 minutes of emergency runtime.The HALP-EMG-48-2L-113 hazardous area emergency fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated emergency light fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The HALP-EMG-48-2L-113 also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This emergency backup only fluorescent light works, mounts and is wired like our HALP-48-2L explosion proof fluorescent light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will illuminate only when there is a loss of power, and will run the standard UL suggested 90 minutes after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. NOTE ON LAMPS: This fixture comes equipped with F32-T8/841 lamps.. Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this hazardous location light. The mounting holes are 7 inches on center across the top of the light.Suggested Applications: The HALP-EMG-48-2L-113 is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.Made in USA QualityLamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface.3. Fixture housing constructed of glass fiber reinforced polyester.4. Relamping done via 6 stainless steel snap locking latches, which enable the operator to remove the door and access the lamps.5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.6. 1/2" or 3/4", threaded access hole for wiring conduit. F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color Specifications / Additional Information HALP-EMG-48-2L-113U.L. RatingsUL Listing: United States - CanadaClass I Division 2, Groups A, B, C and D Lamp Type: Fluorescent Class II, Division 2, Groups F, G Dimensions: W-8.25 " L-52" H-7"UL 844Weight: 8 Lbs UL 924Voltage: Universal 120-277VAC 50/60 hzUL 8750Total Watts: 64 Watts UL 1598A Marine TypeTotal Lumens T8 Bulbs: 5,900NEMA 4XLuminous Efficacy F17-T8 Bulbs: 92 Lm/WCSA 22.2 No. 137-M81LED Lamp Life Expectancy: 24,000+ HourscUL Listed for CanadaColor Temp: 4100KMeets USCG SpecsBeam Angle: 150¡T4 Temperature RatingAmbient Operating Temp Range:-30¡C to +70¡CSwitch Leg for Powering Light On/OffOperating Temp Range: T4C ratedIP66 RatedMounting: Flange Type - Stainless SteelSpecial Orders- RequirementsWiring Hub: 1/2" or 3/4" Threaded NPT Hubs Contact us for special requirements Battery Backup: 90 minute runtime at 900 lumens Toll Free: 888-325-4448U.L Approval: U.S Certificate Canada Certificate E-mail: [email protected]