Larson Electronics C1D2 20W LED Oxygen Level Warning Sign Light & Horn - Non-Metallic - Corrosion Resistant - 110dBA

Made in the USA The HAL-TL-2X10W-C-OXM-PA Class I Division 2 Chemical Resistant LED Oxygen Level Warning Light and Horn from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED equipped light is designed for use in industrial environments where oxygen levels are monitored within the atmosphere and have the potential to fall below the OSHA recommended oxygen concentration within the work environment. When the blue low oxygen light comes on triggered by an operator provided O2 sensor, the warning horn will sound to alert operators to the low oxygen levels. The powerful and durable HAL-TL-2X10W-C-OXM-PA hazardous location LED light from Larson Electronics is an ideal indicator lighting solution for industrial refueling stations and areas where oxygen levels may be depleted within the workplace. The housing is waterproof, constructed of corrosion and chemical resistant body that is equipped with Pyrex globes with polycarbonate globe guards, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED signal lamp and warning horn has a 50,000 hour operational life and is available in 120-240V AC or 24V DC configurations for high or low voltage operation. Each lamp is equipped with a warning sign and horn to indicate the status of oxygen levels within the environment. A green LED lamp illuminates the "OK" sign to indicate that the oxygen levels are satisfactory. A blue LED lamp illuminates the "Low O2" sign to indicate that oxygen levels have reached a unsatisfactory level. When the blue LED lamp turns on due to low oxygen levels, the warning horn will sound to alert people within the vicinity of the situation. The horn reaches a peak output of 110dBA which is powerful enough to be heard over industrial operations. Please Note: This indicator lighting system does not monitor or measure oxygen levels. Customer provided equipment is required for the measurement of O2 levels within the hazardous location. The HAL-TL-2X10W-C-OXM-PA provides a visual and audible indication of levels and works in conjunction with existing monitoring systems. This hazardous area LED light carries has a -29¡C to 40¡C (-29¡F to 104¡F) operating temp range. The HAL-TL-2X10W-C-OXM-PA is Class I Division 2 approved, carries UL 1570/1571 and UL 595 compliance, and is waterproof and suitable for spray down areas and marine locations. Power is provided by a shared neutral and ground, with separate hot wires for each lamp to allow each LED lamp to be powered independently. This LED light carries UL and CSA certification, USCG acceptance, NTRL Listing for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas. The HAL-TL-2X10W-C-OXM-PA is equipped with an explosion proof horn providing operators in hazardous locations with an effective and powerful alert/signal system that can withstand demanding conditions and be heard over the operation of industrial machinery and equipment. The HAL-TL-2X10W-C-OXM-PA is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. This hazardous location LED warning sign light and horn is configured for green and blue output (one lamp each color) offers exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarbonate globe guards. The LED lamps in this indicator light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Sign wordage customization is available. Please contact us for special color configurations. Voltages: 120-240V AC 50/60Hz or 24V DC At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-TL-2X10W-C-OXM-PA Explosion Proof LED Stack Light w/ Audible Alarm Ratings/Approvals Lamp Type: LED United States & Canada Colors: Green, Blue Class 1,Division 2 Groups A,B,C,D Watts: 10 Watts Per Lamp - 20W Total (7W each for 11-25V) UL Listed to CSA 22.2-137 Voltage: 120-240V AC 50/60 Hz or 24V DC Class 1,Division 2 Groups A,B,C,D Lighting Configuration: Strobe light or Steady Burn UL 844: Class1 Division 2 Hazardous Location Lamp Life: 50,000+ Hours UL 595: Outside Marine Sign Wordage: OK, O2 Low UL 1570/1571: Wet Locations Mount: Predrilled Aluminum Base NEMA 4X Mounting Dims: 22"L x 16"H x 12"D -29¡C to 40¡C (-29¡F to 104¡F) Op Temp Horn Decibels: 110dBA CSA Approved USCG Accepted New York City Department of Buildings Approved Material meets UL 94-V-0 standards for flame retardant Explosion Proof Horn Indicates Low Oxygen Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase