Larson Electronics 75 KVA Portable Power Distribution - 480V to 208Y/120 3PH - SS 316, N4X - Galvanized Cart/Roof

Made in Texas The Larson Electronics MPD-XC-SS316-75KVA-150MCB-TKD-MOD1 power distribution substation converts 480V AC three phase electrical current into three phase 208Y/120V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. This 316 stainless steel portable panel is mounted on a galvanized cart with a galvanized roof, making the unit suitable for outdoor applications. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-XC-SS316-75KVA-150MCB-TKD-MOD1 portable power distribution system gives operators the ability to power their 208-volt and 120-volt equipment from a single system. On the primary side, operators connect 480V line-in power via 20` 4/4 Type W cords with 100-amp pin/sleeve IEC 60309 IP67 rated cord caps. On the secondary side, operators provide their own outlets to power 208 volt and 120 volt equipment. Operation: (3) 20` 4/4 Type W cords with a 100-amp pin/sleeve IEC 60309 IP67 rated cord caps bring in 480V three phase power to the NEMA 4X 75 KVA transformer. The transformer converts 480V three phase power to 208Y/120 three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 4X 250-amp MCB panel. This secondary panel contains ten 2-pole, 20-amp breakers and two 2-pole, 30-amp breakers for operators to utilize when providing their own outlets to the portable panel. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is constructed of 316 stainless steel and is designed for rugged use, capable of withstanding extreme conditions and heavy-duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick galvanized steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square galvanized steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. A galvanized roof protects the unit from sunlight, debris and corrosive elements. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 4X rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 3R and NEMA 4 equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-XC-SS316-75KVA-150MCB-TKD-MOD1 Power Transformer Line-In Cord: (3) 20` 4/4 Type W Max OCP Primary: Customer provided Line-In Cord Cap: (3) 100A IEC 60309 Pin/sleeve IP67 Rated Max OCP Secondary: 250A @ 208V Primary Voltage: 480V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 4X Indoor/Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - 316 Stainless Steel Panel Primary Receptacles: - Primary Protection: - Transformer: 75KVA 480V to 208Y/120 3PH N4X Secondary Voltage: 208Y/120 3PH Secondary Panel: 250A MCB N4X Secondary Breakers: (10) 2-pole 20A, (2) 2-pole 30A Secondary Receptacles: - Secondary Protection: - Special Orders- Requirements Form Factor: Galvanized square tube frame, skid pockets, top pick eye & locking 8” locking casters, galvanized roof Contact us for special requirements Frame Materials: Galvanized Steel Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Weight: 900 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase