Larson Electronics 500kVA Power Distribution - 208V to 240D/120V 3PH - 400A E1016 Cam-lock Inputs/Outputs

Made in Texas The Larson Electronics MPD-208V.3P.1600A-CL-500KVA-240D.120V.3P.1200A-CL power distribution substation converts 208V AC three phase electrical current into three phase 240D/120V AC. This unit provides operators the ability to safely tap into and distribute 208V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-208V.3P.1600A-CL-500KVA-240D.120V.3P.1200A-CL portable power distribution system gives operators the ability to power their three phase 240D/120V equipment from a single system. On the primary side, operators connect 208 volt line-in power via four sets of E1016 male cam-lock inputs (black, red, blue and green). On the secondary side, three sets of E1016 female cam-lock outputs (black, red, blue and green) are accessible for customer-provided equipment. Operation: Four sets of 400-amp 600V rated E1016 male cam-lock inputs (black, red, blue and green) bring 208V three phase power to the NEMA 3R 2000-amp 208V three phase primary disconnect, which contains three 1600-amp time delay fuses, and passes 208V three phase through to the transformer. The NEMA 3R 500 KVA transformer converts 208V three phase power to 240D/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 1200-amp 240D/120V three phase secondary disconnect. This secondary disconnect, which contains three 1200-amp time delay fuses, is equipped with three sets of 400-amp 600V rated E1016 female cam-lock outputs (black, red, blue and green). Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a carbon steel mounting platform and the load center/distribution assembly is mounted to a 50"W x 60"D x 72"H square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-208V.3P.1600A-CL-500KVA-240D.120V.3P.1200A-CL Power Transformer Ratings Line-In: (4 Sets) 400A 600V Rated E1016 Male Cam-locks (Black, Red, Blue, Green) Max OCP Primary: 1600A @ 208V Line-In Cord Cap: - Max OCP Secondary: 1200A @ 240V Primary Voltage: 208V AC, 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 2000A 208V 3PH Fused @ 1600A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Switch, Time Delay Fuses Transformer: 500 KVA 208V to 240D/120V 3PH 60Hz N3R Secondary Voltage: 240D/120V AC, 3PH Secondary Disconnect: 1200A 240D/120V 3PH Fused @ 1200A N3R Secondary Panel: - Secondary Breakers: - Secondary Connections: (3 Sets) 400A 600V Rated E1016 Female Cam-locks [Black, Red, Blue, Green] Special Orders- Requirements Secondary Protection: Disconnect Switch, Time Delay Fuses Contact us for special requirements Form Factor: XL Square tube frame, skid pockets, top pick eye & 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 50"W x 60"D x 72"H Fax: 1-903-498-3364 Weight: 3250 pounds E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase