Larson Electronics 27W Handheld Magnetic LED Light - 2160 Lumens - Aluminum Body - Inverted Pistol Grip - IP67

The HML-27R-LED from Larson Electronics is a Handheld Magnetic LED Light that offers high light output in a compact form factor. This unit produces 2,160 lumens of light output with very low amp draw and compatibility with 10-30V. The handheld LED lamp features a 100 lbs rated magnet for mounting and an inverted pistol grip handle for robust control of the light head. The HML-27R-LED produces 2,160 lumens of bright light while drawing only 27 watts @ 2.25 amps from a 12 volt electrical system. Nine high output three watt LEDs producing 240 lumens each are arranged in a circle and paired with high purity optics to produce a wide 30 degree flood beam. These LED lights are IP67 waterproof, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. Durability: As well as unparalleled heat control, the HML-27R-LED also offers IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded diecast aluminum and the lenses are unbreakable polycarbonate. We recommend these LED lights for high humidity climates, very cold areas and rough saltwater conditions. They are also applicable to environments where equipment is used in one temperature extreme and stored in another temperature extreme. 16ft Coil Cord w/Cigarette Plug 21ft Cord with Ring Terminals 16ft Cord w/Battery Clamps 16ft Cord with Cigarette Plug Click Images to Enlarge Each light comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available. This light can be ordered in either 12 volt or 24 volt configuration, allowing it to be used with any vehicle or ATV equipped with a cigarette plug. Choose voltage below when ordering. Mounting: The HML-27R-LED features an ergonomically designed 5 inch tall pistol grip handle that matches the contours of your hand and a light head that can be adjusted horizontally and vertically. This LED light is equipped with a 3.25 inch diameter, 100lb grip magnetic base. The operator can use the reverse pistol grip handle to position the beam. The tension style hinge brackets will then keep the light in the desired position until the operator moves it again. The 100 pound grip magnet base holds the light in place on protective barriers and gun turrets on the military HUMVEE, even under the most aggressive road and off-road conditions. The heavy gauge steel handle bracket supports the hinged lamp head and solid polypropylene handle. Easily field serviceable. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HML-27R-LED Portable LED Light with Magnetic Base Ratings/Approvals Lamp Type: CREE XLamp XR-E¨ LED IP67 Waterproof to 1 Meter Dimensions: 4.5"W x 6.75"H x 1.5"D Impact/Vibration Resistance Weight: 2 lbs Shatterproof Lens Voltage: 12V DC or 24V DC Ambient Op Temp -40¡C to +85¡C Watts: 25W Available with Choice of Cord and Plug Lumens: 2,250 Ideal for Hunting and Outdoor Applications Luminous Efficacy: 90 Lm/W Extremely Durable and Versatile LED Light Color: 6000K LED Life Expectancy: 30,000 hours Lighting Configuration: 30¡ Flood Beam Amps: 2.25 @ 12V DC - 1.125 @ 24V DC Ambient Operating Temp Range: -40¡C to +80¡C Wiring Options: 16` Cigarette Coil, 16` Cigarette, 21` Ring Terminals, 16` Battery Clamps, 16` Flying Leads Housing Material: Die Cast Aluminum Housing Color: Black Special Orders- Requirements Lens Material: Polycarbonate Contact us for special requirements Waterproof Rating: IP67 Toll Free: 888-325-4448 Mounting: 100 lb Magnet Mount w/ Pistol Grip Adjustment Handle Color: Black E-mail: [email protected] Scroll Down to Purchase-