Larson Electronics 25KVA Temporary Power Distribution - 480V to 120/240V 1PH - (2) L6-30R (12) 5-20R GFCI - N3R

Made in Texas The Larson Electronics MGL25-480-12X120-2X250 Temporary Power Distribution System converts 480VAC electrical current into single phase 120/240VAC. This system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MGL25-480-12X120-2X250 portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect three phase 480V using 50` of #8 Type W cord, with a 460P7W cord cap. On the secondary side, operators may access two L6-30R receptacles for 240V equipment and twelve 5-20R GFCI receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A 50` #8 Type W cord with a 60-amp 460P7W 480V cord cap brings 480V three phase power to the NEMA 3R 60-amp 480V three phase primary disconnect, which contains two 60-amp time delay fuses, and passes 480V single phase power to the transformer. The 25KVA NEMA 3R transformer converts 480V to 120/240V single phase 60Hz and passes the current to the secondary side. The secondary side of the transformer is equipped with a NEMA 3R 125-amp 120/240V single phase main lug only panel. This secondary panel contains two 30-amp 2-pole 250V breakers protecting two 30-amp L6-30R 250V receptacles and twelve 20-amp 1-pole 125V breakers protecting twelve 20-amp 5-20R GFCI 125V receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The load center is mounted within a NEMA 3R enclosure (optional glass door) for protection against accidental contact, rain, dust, splashing water and sprayed water. The transformer and load center/distribution assembly are mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL25-480-12X120-2X250 Temporary Power Distribution System Ratings Line-In Cord: 50` #8 Type W Cord Max Primary OCP: 60A @ 480V Line-In Cord Cap: 60A 460P7W [480V] Max Secondary Output: 104.2A @ 240V Primary Voltage: 480V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 60A 480V 3PH Fused @ 60A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Switches, Time Delay Fuses Transformer: 25KVA 480V to 120/240V 1PH 60Hz N3R Secondary Voltage: 120/240V 1PH Secondary Disconnect: - Secondary Panels: 125A 120/240V 1PH MLO N3R Secondary Breakers: (2) 30A 2P [250V], (12) 20A 1P [125V] Special Orders- Requirements Secondary Receptacles: (2) 30A L6-30R [250V], (12) 20A 5-20R GFCI [125V] Contact us for special requirements Secondary Protection: Circuit Breakers, GFCI, Weatherproof Covers Phone: 1-214-616-6180 Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Toll Free: 888-325-4448 Dimensions: W-40" X D-40" X H-48" Fax: 1-903-498-3364 Weight: 350 lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*Scroll Down to Purchase