Larson Electronics 25KVA Power Distribution - 240V to 120/240V 1PH - (2) L6-30R (1) L5-30R (1) L5-20R (6) 5-20R-GFCI

Made in Texas The Larson Electronics MGL-240-25KVA-120-8X120-2X240-MOD1 power distribution substation converts single-phase 240VAC electrical current into single-phase 120/240VAC. This unit provides operators the ability to safely tap into and distribute 240VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MGL-240-25KVA-120-8X120-2X240-MOD1 portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 240V single phase via one AR20023RS line-in receptacle. On the secondary side, operators connect to two L6-30R receptacles for 240V equipment and to one L5-30R, one L5-20R and six 5-20R GFCI receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: Operators bring in 240V single phase power via one 200-amp 600V AC rated line-in receptacle to the NEMA 3R 200-amp 240V single phase primary disconnect, which contains two 125-amp time delay fuses, and passes 240V single phase to the transformer. The NEMA 3R 25KVA transformer converts 240V single phase power to 120/240V single phase and passes the current to the secondary side. The secondary side of the transformer contains a NEMA 3R 125-amp 120/240V single phase main lug only panel. This secondary side contains two 30-amp 2-pole 250V breakers protecting two 30-amp 250V L6-30R receptacles, one 30-amp 1-pole 125V breaker protecting one 30-amp 125V L5-30R receptacle and seven 20-amp 1-pole 125V breakers protecting one 20-amp 125V L5-20R receptacle and six 20-amp 125V 5-20R GFCI receptacles. Protective Construction: The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. A center point lift pickeye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-240-25KVA-120-8X120-2X240-MOD1 Temporary Power Distribution System Ratings Line-In Cord: - Max Primary OCP: 125A @ 240V Line-In Cord Cap: - Max Secondary Output: 104.2A @ 240V Line-In Receptacle: 200A AP20023RS [600V Rated] UL 1640 Portable Power-Distribution Equipment Primary Voltage: 240VAC 1PH NEMA 3R Indoor / Outdoor Use Primary Disconnect: (1) 200A 240V 1PH Fused @ 125A Made in the USA Primary Panel: - No Flat Tires Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect, Time Delay Fuses Transformer: 25KVA 240V to 120/240V 1PH 60Hz N3R Secondary Voltage: 120/240VAC 1PH Secondary Disconnect: - Secondary Panel: 125A 120/240V 1PH MLO N3R Secondary Breakers: (2) 30A 2P [250V], (1) 30A 1P [125V], (7) 20A 1P [125V] Secondary Receptacles: (2) 30A L6-30R [250V], (1) 30A L5-30R [250V], (1) 20A L5-20R [125V], (6) 20A 5-20R GFCI [125V] Special Orders- Requirements Secondary Protection: Breakers, Weatherproof Covers, GFCI Contact us for special requirements Form Factor: Powder coated steel frame, dolly cart style and top mount center pickeye Phone: 1-214-616-6180 Frame Materials: Powder Coated Steel Frame Toll Free: 888-325-4448 Dimensions: 22"-W x 22"-D x 56"-H Fax: 1-903-498-3364 Weight: 275 pounds E-mail: [email protected] *Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.* *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*Scroll Down to Purchase