Larson Electronics 25 KVA Power Distribution Station - (1) 480V 60A Outlet - 25KVA - (10) 120V 20A GFCI Outlets

Made in the USA This Larson Electronics MGS-480-2XL6-30-25K-10X120GFI power distribution system enables operators to use one 60A pin and sleeve receptacle on the 480V primary side and ten 120 volt 5-20 GFCI weatherproof outlets on the secondary side. This portable power transformer provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turn-arounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. Click Photo to Enlarge Click Photo to Enlarge This portable panel distribution system is designed to operate with 480 VAC which it then steps down to 120 and 240 VAC single phase. On the 480V primary side, a 125-amp main breaker, Nema 3R panel contains a 60-amp breaker, which protects one 460R7W receptacle with a weatherproof cover. The 480V primary panel also includes a 60-amp breaker to protect the 25KVA transformer. The 25KVA transformer steps down 480v to 120/240 single phase and feeds a 100-amp main breaker Nema 3R panel. The secondary load center include ten 20-amp, single pole breakers protecting ten 5-20 GFI outlets with weatherproof covers. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and distribution assembly is mounted onto a rugged, powder coated, carbon steel frame with integrated skid pockets, a top located lifting eyelet, and 8" locking casters to allow easy transport. The standard frame is constructed of 2" x 1/8" thick square tubing and powder coated for corrosion resistance. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. This power distribution system is weatherproof and ideal for outdoor use and applications including but not limited to, plant maintenance, welding stations, shows, exhibits and marine applications. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-480-2XL6-30-25K-10X120GFI Power Transformer Ratings Line In: 480V connection to primary panel provided by customer UL 1640 Portable Power-Distribution Equipment Primary panel: 125-amp main breaker Nema 3R panel – 480V NEMA 3R Indoor or Outdoor Use Primary panel breakers: 1 X 20-amp, 2 X 60-amp Made in the USA Primary panel receptacles: 1 X 460R7W Transformer: 25KVA 480V to 120/240 1P Secondary panel: 100-amp main breaker Nema 3R panel – 120/240V Secondary panel breakers: 10 X 20-amp single pole breakers Secondary panel receptacles: 10 X 5-20 GFI with weatherproof covers Special Orders- Requirements Features: Contact us for special requirements Max OCP Primary: 125A @ 480V Toll Free: 888-325-4448 Max OCP Secondary: 100A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase