Larson Electronics 15 Watt Compact Explosion Proof LED Light - 120-230 Volts AC or 24 Volts DC - Class 1 Div 1

Made in USA The EXPSG-LED-15W Explosion Proof LED Light is ATEX approved Zone 1 & 2, Zone 21 & 22, and rated for use in wet environments. The waterproof construction, bright white output, and long lamp life of this LED fixture provides operators with high output and low maintenance operation, making this low voltage LED light an excellent upgrade from shorter lived incandescent glass lamps. The EXPSG-LED-15W Explosion Proof LED Light is compact and powerful. This unit is equipped with a 15 watt LED lamp assembly that runs cooler and lasts far longer than traditional incandescent lamps, and produces high light output while operating on 120-230V AC high voltage or 24V DC low voltage current. This unit is approved for wet locations and ideal for use in small spaces within hazardous locations. The EXPSG-LED-15W is excellent for specific area lighting such as instruments, control panels, valve manifolds, walkways, etc. The EXPSG-LED-15W is an excellent lighting solution for specific area lighting such as instruments, control panels, valve manifolds, walkways, etc. These sturdy lights are constructed of corrosion-resistant aluminum body with stainless steel hardware and are moisture-proof as well as explosion-proof (hazardous locations), so they are equally well suited for use in demanding installations indoors and out. The LED lamp in this light offers greater output and longer life than halogen glass lamps, which improves work area visibility and reduces the need for maintenance and bulb replacements. This LED lamp has a 50,000 hour operational life, and produces as much light as a 50 watt halogen lamp while running far cooler and using only a fraction as much electrical power. This lamp is designed for low voltage operation and can be run from standard 120-230V AC or 24V DC current. This LED glass light is approved II 2G Ex d IIC T6 Gb, II 2D Ex tb IIIC T80¡C Db, and IP67 waterproof for wet areas, making it well suited to industrial locations where water resistance and explosion proof protection is mandatory. Mounting Brackets: A straight stainless steel mounting bracket included standard with this light is for use on single ports from 3” to 6” in size. Angle (offset) brackets are available for 6” and larger assemblies used for single light port combinations. Brackets are adaptable to various types of mounting configurations for area lighting. Parts, Construction and Materials• Luminaire body: Corrosion resistant aluminum alloy, Al Mg Si 0.5, finish: RAL 9007• Lens Holder: Unit of aluminum ring, borosilicate glass• Brackets: Stainless Steel, 1.4301, • Weight: 3.3 lb. (1.5 Kg)• Cable Gland: M20 x 1.5 Electrical Connection Installation1. Disconnect main power supply2. Remove side entrance cover3. Attach power leads to terminal block4. Replace cover insuring gasket (o-ring) is in place. Tighten.5. Connect powerConnections to be in accordance with National Electric Code¨ Requirements Specifications / Additional Information EXPSG-LED-15W LED Compact Light Approvals UL Listing: United States II 2G Ex d IIC T6 Gb Lamp Type: LED II 2D Ex tb IIIC T80¡C Db Weight: 3.3 Lbs Approved Zone 1 & 2 for Gases Total Watts: 15 Approved Zone 21 & 22 for Dusts Voltage: 120-230V AC OR 24 Volts DC IP67 Rated Waterproof Amps: 0.125 on 120V AC - 0.625 on 24V DC Mounting: Stainless Steel Brackets Housing: Aluminum Alloy Special Orders- Requirements Wiring: M20 Cable Gland Contact us for special requirements Operating Temp Range: -20¡C to 40¡C ambient Toll Free: 888-325-4448 LED Lamp Life: 50,000 Hours LED Output Color: 6000K E-mail: [email protected]