Buy American CompliantThe Larson Electronics HUL-LEDP1X10W-DIMM-110V dimmable spotlight is a rugged and effective LED spotlight designed to provide users with a powerful, durable, and easy to use source of reliable light. This spotlight has a 10 watt LED bulb which produces a light beam approximately 650` long. This spotlight includes 20 feet of 16/2 SOOW straight cord between the spotlight and PWM dimmer, a 120-277V AC waterproof and 5 feet of 16/3 SOOW cable terminated with a general area cord cap for easy connection to household outlets and equipment power sources. This durable and weatherproof spotlight is ruggedly designed to withstand heavy duty use and includes a 20 foot straight cord, PWM inline dimmer, inline transformer and general area cord cap to allow connection to any standard 110V wall outlet. This light contains a single 10 watt LED bulb paired with a precision aluminum reflector and borosilicate hardened glass lens. This beam is strong enough to allow operators to read signs, license plates, addresses and other similar markings at the far end of its total range.This spotlight is built for durability and comfort with an impact resistant housing, an ergonomically designed 5 inch tall polycarbonate handle that matches the contours of your hand, and a light head that can be adjusted vertically. The 5.5 inch diameter lamp and reflector assembly is protected by a polycarbonate lens that is sealed against water and dust to provide an IP68 rating and weatherproof protection. This light includes an inline transformer to allow operation with common 110V AC wall plug current. The inline transformer is multi-voltage and operates on 110-277 volts AC 50/60Hz. However, the operator can remove the transformer and run this unit on any voltage from 12 to 32 volts. The HUL-LEDP1X10W-DIMM-110V handheld spotlight draws 0.084 amps @ 120V AC, and 0.84 amps @ 12V DC. Larson Electronics provides 25 feet of SOOW cable so that the LED is able to position itself away from the wall where it receives it`s power. This spotlight is a powerful and rugged design ideal for use in hunting, utility, emergency, industrial/commercial and military/law enforcement applications.The following pictures show a large open field being illuminated by the HUL-LEDP1X10W-DIMM-110V. The intense spot beam travels over 650` in length. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Durability-Convenience: The HUL-LEDP1X10W-DIMM-110V dimmable spotlight is constructed of impact resistant materials including an aluminum housing and polycarbonate handle. The lamp assembly contains an aluminum reflector and borosilicate impact and scratch resistant polycarbonate lens. The lamp assembly is sealed against water and dust and the entire unit is IP68 rated waterproof to 3 meters. Power: The HUL-LEDP1X10W-DIMM-110V comes with 20 feet of 16/2 SOOW straight cord between the spotlight and PWM inline dimmer along with a waterproof 120-277V AC inline transformer and 5 feet of 16/3 SOOW cable between the transformer and the included general area cord cap. This setup allows the HUL-LEDP1X10W-DIMM-110V dimmable LED spotlight to be used with standard wall outlets. Operators may disconnect the transformer from the unit for 12-32V DC operation including 12V and 24V DC allowing it to be used with any vehicle or ATV equipped with a low voltage DC power source. The PWM dimmer must remain connected for the spotlight to retain the dimming capablities the inline dimmer allows for.Dimmer Information: The dimmer included with this unit is a Pulse Width Modulator Controller designed to dim the LED light of the HUL-LEDP1X10W-DIMM-110V. Basically, this is a voltage regulator for LED lights drawing 12 amps or less. PWM controllers are CPU controlled, digital alternatives to resistance based rheostats. This PWM controller has a rotating switch that enables the operator to control the brightness of the LED light. Thus, many operators will use this as a "dimmer" switch. It produces 135Hz and is equipped with male and female 2 pin Deutsch connectors so that it can be used inline. This PWM can be used as a handheld or it can be surface mounted. Mounting ears extend from the unit to enable operators to surface mount the unit.Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V RatedL5-15 Twist Lock Plug15 Amp / 125V RatedL6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail WiresWiring/Plug: This general area dimmable LED spotlight is equipped with 5 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.Versatility: The entire unit weighs only 1.2 lbs. The light head is mounted to the handle with an adjustable hinge that allows the head to be adjusted vertically. The five inch tall handle is ergonomically designed to fit the contours of your hand for a comfortable grip. This unit is ideal for hunting as well as military, security and law enforcement use and any application that requires an extremely durable and effective source of portable illumination.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information HUL-LEDP1X10W-DIMM-110V Dimmable LED SpotlightLamp Type: LED Dimensions: 4.07" High 3.07" Wide 3.8"Weight: 1.2 Lbs Watts: 10 watts Voltage: 120-277V ACBeam: 650` -LWiring: 20` 16/2 SOOW Cord w/ Inline UL Listed TransformerCord Cap Wiring: 5` 16/3 SOOW Cord w/ General Area Cord CapCord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, PigtailIP Rating: IP68 Waterproof Special Orders- RequirementsLight Color: White Contact us for special requirements Optic Purity: 90% Toll Free: 1-800-369-6671Mounting: Handheld PortableIntl: 1-903-270-1187Operating Temp: -40 degrees C to 80 degrees CE-mail:[email protected] Scroll Down to Purchase-
Larson Electronics 10W Handheld LED Dimmable Spotlight - 120-277VAC - Inline Transformer + Dimmer - General Cord Cap
Larson Electronics
(No reviews yet)
Write a Review
Write a Review
Larson Electronics
Larson Electronics 10W Handheld LED Dimmable Spotlight - 120-277VAC - Inline Transformer + Dimmer - General Cord Cap
- SKU:
- HUL-LEDP1X10W-DIMM-110V
- UPC:
- Weight:
- 0.00 LBS
!