Fluke Amprobe AT-6010 Advanced Wire Tracer Kit


(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
Fluke Amprobe AT-6010 Advanced Wire Tracer Kit

Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the transmitter is connected to the circuit energized or de-energized, up to 600 V AC/DC in CAT I through CAT III electrical environments), the receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors. Work safely on energized circuits without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.

PITA 2019 Award Winner

Product Highlights

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints shorts and opens
  • High resolution 2.5_ TFT LCD black & white display
  • Simple one button Transmitter operation
  • Two Transmitter signal modes: ÒHigh SignalÓ mode for normal circuits and ÒLoopÓ mode for closed loop de-energized circuits
  • Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
  • Comes with custom Amprobe soft carrying case, test leads and accessories
  • Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline

Key features

  • Work directly on energized circuits without taking equipment offline
  • Save time searching for energized and de-energized electrical wires hidden behind walls, ceilings and floors
  • Pinpoint wire location with the large LCD receiver screen featuring a two digit readout, bar graph and sound
  • Identify breakers and fuses, as well as the location of a break, open or short

FeaturesAT-6010-R ReceiverAT-6010-T Transmitter
Measurement categoryCAT III 600 V
Operating voltage/current0 to 600 V
Operating frequencyEnergized: 6.25 kHz
Hazardous voltage detectionN/A> 30 V AC/DC
Signal indicationsNumeric bar graph display and audible beepLEDs
Response timeTip Sensor (Energized/De-energized): 500 ms
Battery voltage monitoring: 5 sec
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Current output of signal (typical)N/AEnergized circuit:
HI mode: 60 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
Loop mode: 160 mA RMS
Signal voltage output (nominal)N/ADe-energized circuit:
HIGH: 33 V RMS, 140 Vp-p
With CT-400:
Loop model:
31 V RMS, 120 Vp-p
Range detection (open air)Tip Sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip Sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)
Display sizeLCD 2.5 in (6.35 cm)N/A
Display dimensions (W x H)1.45 x 1.93 in
(36.72 x 48.96 mm)
Display typeSegment LCDLEDs
Display colorBlack and whiteOperating mode LEDs: red
Battery status LED: red
Booting time< 3 sec< 2 sec
Operating temperature-4 ¡F to 122 ¡F (-20 ¡C to 50 ¡C)
Operating humidity45%: -4 ¡F to <50 ¡F (-20 ¡C to <10 ¡C)
95%: 50 ¡F to <86 ¡F (10 ¡C to <30 ¡C)
75%: 86 ¡F to <104 ¡F (30 ¡C to <40 ¡C)
45%: 104 ¡F to 122 ¡F (40 ¡C to 50 ¡C)
Storage temperature and humidity-4 ¡F to 158 ¡F (-20 ¡C to 70 ¡C), <95% RH
Operating altitude0 to 6561 ft (2000 m)
Transient protectionN/A6.00 kV (1.2/50_S surge)
Pollution degree2
IP ratingIP 52IP 40
Drop test3.28 ft (1 m)
Power consumption (typical)70 mAHi mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA
Battery lifeApprox. 25 hHi mode: approx. 25 h
Loop mode: approx. 18 h
Low battery indicationYes
FuseN/A1.6 A, 700 V, fast-acting,
¯ 6x32mm
Dimensions (L x W x H)Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm)
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm)
WeightApprox. 0.6 lb (0.27 kg)Approx. 1.25 lb (0.57 kg)