| Compliance |
| UL Listed | Suitable for damp locations |
| IESNA LM-79 & LM-80 Testing | RAB LED luminaires have been tested by an independent laboratory in accordance with IESNAlm-79 andlm-80 |
| DLC Listed | This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-SM9GEZ |
| Electrical |
| Driver | 30W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.25A, 208V: 0.15A, 240V: 0.13A, 277V: 0.11A25W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.21A, 208V: 0.12A, 240V: 0.10A, 277V: 0.10A18W: Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 0.15A, 208V: 0.09A, 240V: 0.08A, 277V: 0.07A |
| Dimming Driver | Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. |
| THD | 3.43% at 120V, 4.22% at 277V |
| Power Factor | 99.72% at 120V, 96.03% at 277V |
| Battery Backup | Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120. |
| Surge Protection | 2.5kV |
| Construction |
| Housing | Steel sheet metal |
| Cold Weather Starting | The minimum starting temperature is -20°C (-4°F) |
| Ambient Temperature | Suitable for use in up to 40°C (104°F) |
| Reflector | High-reflectance, powder-coated finish, optimized for uniform light distribution |
| Lens | Polycarbonate lens |
| Finish | Formulated for high durability and long-lasting color |
| Green Technology | Mercury and UV free. RoHS-compliant components. |
| LED Characteristics |
| LEDs | Long-life, high-efficacy, surface-mount LEDs |
| Color Stability | LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period |
| Color Uniformity | RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017. |
| Installation |
| Mounting | Retrofits into the existing housing |
| Performance |
| Lifespan | 100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations |
| Sensor Settings |
| Capacitance Load | 400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Relay | Zero-cross relay |
| Maximum Mounting Height | 16.4 ft |
| Customizable Detection Area | 10, 50, 75 or 100% |
| Time Delay | 5s, 30s, 1min, 5min, 10min, 20min, 30min |
| Cut Off Period | 0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level |
| Cut-Off Dimming level | 10, 20, 30, 50% |
| Cut-Off Power | Less than 1W |
| Daylight Threshold | Disable/400Lux/350Lux/300Lux/250Lux/200Lux/120Lux/ 80Lux/50Lux/30Lux/10Lux/2Lux |
| Sensor Principle | High Frequency |
| Microwave Frequency | 5.8GHz +/- 75MHz |
| Microwave Power | <0.3mW |
| Max Detection Range | 26 ft diameter at 16 ft mounting height |
| Detection Angle | About 30 to 150 degrees |
| Remote Control Accessory | Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here. |
