Larson Electronics Integrated Explosion Proof LED Paint Spray Booth Light - C1D1, C2D1 - Modbus TCP/IP Network Capable

Made in the USAThe Larson Electronics EPL-ANC-48-2L-ITG-LED Explosion Proof Integrated LED Light Fixture is a NRTL Listed for United States and Canada connected lighting solution for Class 1 Division 1 & 2 and Class 2 Division 1 and 2 environments. Modbus TCP/IP capable, this integrated explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants. Operators can setup remote access, controls and configurations using the Modbus TCP/IP network controller (via a standard web browser).This four foot, two lamp integrated connected LED fixture is ideal for operators seeking a top quality explosion proof LED light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-ANC-48-2L-ITG-LED is equipped with a specially designed integrated LED assembly which produce 8,000 lumens, resulting in 50% more foot candles of illumination at 8 feet as compared to standard T5HO lamps when measured with an Extech light meter. Our integrated series are visibly brighter than standard T5HO`s and have consistently surprised many of our customers with their unexpectedly high light output levels.We now offer our first generation integrated LED tube assembly within this fixture which have increased this hazardous location light’s performance. This two lamp explosion proof LED linear fixture is lighter in weight and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T5HO bulbs. These lamps are individually dimmable via Mark 7 0-10V style dimmer switches for maximum control over illumination levels.Aevum Network Controlled Lighting Solution: The Aevum Network Controlled Lighting Solution from Larson Electronics enables connected and intelligent illumination using cutting-edge and existing networks. Using Modbus TCP/IP or DALI (for fixtures with dimming features), businesses can seamlessly control lights and sensors from remote locations, without traditional light switches. Web-based panels facilitate real-time monitoring of connected equipment and allows operators to switch units on/off, configure activation settings and more. Businesses may utilize their own systems and software with these controllers, ensuring robust flexibility and cost savings (no contracts). The Aevum Network Controlled Lighting Solution can improve productivity in the workplace by automating basic lighting controls and making lighting controls widely accessible in the facility, via local networks or the internet. Operators also have the option to monitor the status of fixtures from a remote location, which can improve maintenance and reduce downtimes.Controls: Controls for the explosion proof LED fixture is accessible using a web-based control panel. Compatible with HTTP, XML, or Modbus TCP/IP protocols, network configuration is accessible using web-based pages (no programming required). Operators can monitor or setup controls from a remote area using the internet or local IP network and any standard web browser. Functions and controls include: on/off, pulse and monitor. LED indicator lights on the device provide the real-time information about digital input voltage, relay coil, network status and network activity. Password protection for the setup page is available (10 characters maximum).Click Image to EnlargeClick Image to EnlargeClick Image to Enlarge This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.Unlike the glass tube design of traditional fluorescent lamps, these integrated LED fixtures have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.The dual 40 watt LED assemblies produce 50% more illumination than standard T5HO bulbs while offering lower amp draw and increased reliability. Each lamp produces 4,000 lumens at 100 lumens per watt, for a combined 8,000 total lumen light output. An EPL-48-2L-T5HO explosion proof fluorescent light, with a combined total of 104 watts, draws 0.87 amps at 120 volts AC. This LED version of the same light, with a total of 80 watts, draws only 0.67 amps at 120 volts AC. The EPL-ANC-48-2L-ITG-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.Energy Consumption ComparisonT5HO T8 LEDWattage 108 watts 64 watts 80 wattsAmp Draw @ 120V AC 0.90 amps 0.54 amps 0.67 ampsAmp Draw @ 220V AC 0.49 amps 0.29 amps 0.36 ampsAmp Draw @ 240V AC 0.45 amps 0.27 amps 0.33 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.29 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 6.67 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 3.34 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursOperation cost per year(12hs/day @ 12c/kWh) $56.77 $33.64 $42.04Our EPL-ANC-48-2L-ITG-LED LED light fixture is NRTL Listed U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.Network: The network controller is equipped with one optically-isolated digital input and one SPDT relay contact. Compatible with 9-28V DC, the unit features a 3-position removable relay (N, NO, NC), a 5-position removable power/inputs and an 8-pin RJ-45 port for network connections. Operators can mount the device on walls, surfaces or din rails for space-saving benefits.Mounting Options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Suggested Applications: Modbus TCP/IP lighting networks, remote lighting networks, paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-ANC-48-2L-ITG-LED Explosion Proof LED Connected Fixture Ratings/ApprovalsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and D T6Dimensions: W-11.25" x L-52" x H-8.5 " Class 1 Division 2, Group A,B,C,DWeight: 55 Lbs Class 2, Division 1 & 2, Groups E,F,GVoltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC NRTL Certified to UL 595 Marine Type (Saltwater)Total Watts: 80 watts NRTL Certified to UL 844Total Lumens: 8,000 NRTL Certified to UL 1598 Marine TypeLED Lamp Life Expectancy: 50,000+ Hours Certified Canadian StandardsLuminous Efficiency: 100 Lumens per Watt Listed for Paint Spray BoothsColor Temp: 5000K California Title 24 CompliantColor Rendering Index: >80 IP67 Rated - WaterproofBeam Angle: 150¡ T6 Temperature RatingPower Efficiency: 90% NEMA 4XPower Factor: >0.95 LEL Listed LED LampsAmbient Operating Temp Range:-30¡ C to +85¡C Approved for Confined SparesOperating Temp Rating: T6 Rated Silicone FreeMinimum Operating Temp: -30¡C Factory Sealed FixtureMaximum Case Temp: +90¡C Individually Dimmable LampsHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Made in the USALens Material: Hardened Borosilicate Glass Tubes Password Protected Network ControlsGasket Material: Buna Rubber O-Rings No Programming RequiredMounting: Surface Standard - Pendant Optional Modbus TCP/IP ConnectivityWiring Hub: 1/2" NPT Network Controller Specs Dimensions: 1.41" x 3.88" x 3.1" Weight: 5 oz Network Type: 10/100 Base-T Ethernet Port Protocols: HTTP, XML, Modbus TCP/IP Power Supply: 9-28V DC Digital Input: (1) Optically Isolated 4-26V DC Current: 950uA @ 4V, 8.5mA @ 26V Relay Contacts: (1) SPDT - 240V AC/30V DC Max @ 12A Relay Modes: On/Off or Pulsed Pulse Timer Duration: 0.1 to 86,400 Seconds Input Functions: Monitor, Local Relay Control, Remote Relay Control LED Indicators: (4) Digital Input Voltage Applied, Relay Coil Energized, Network Linked, Network Activity Special Orders- RequirementsOperating Temperature: -40¡C to 57¡C Contact us for special requirementsHousing Material: Lexan 940 Polycarbonate Plastic Phone: 1-214-616-6180Mount: Surface, Wall or DIN Rail Toll Free: 1-800-369-6671Password Protection: Yes @ Setup (Base 64 Encoding, 10 Characters) Fax: 1-903-498-3364Connectors: 3-position Removable (Relay- C, NO, NC), 5-position Removable (Power/Input), 8-pin RJ-45 (Network) E-mail: [email protected]