Larson Electronics Integrated Explosion Proof LED Paint Spray Booth Light - C1D1/C2D1- 8,000 lms - 347V AC

The Larson Electronics EPL-48-2L-ITG-LED-347V Explosion Proof Integrated LED Light Fixture is NRTL Listed for United States and Canada and rated Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. Designed to operate on 347V AC, this integrated explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.This four foot, two lamp integrated LED fixture is ideal for operators seeking a top quality explosion proof LED light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-48-2L-ITG-LED-347V, which operates on 347V AC, is equipped with a specially designed integrated LED assembly which produce 8,000 lumens, resulting in 50% more foot candles of illumination at 8 feet, compared to standard T5HO lamps when measured with an Extech light meter. Our integrated series are visibly brighter than standard T5HO`s and have consistently surprised many of our customers with their unexpectedly high light output levels.We now offer our first generation integrated LED tube assembly within this fixture which have increased this hazardous location light’s performance. This two lamp explosion proof LED linear fixture is lighter in weight and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T5HO bulbs. These lamps are individually dimmable via Mark 7 0-10V style dimmer switches for maximum control over illumination levels.This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.Click Image to EnlargeClick Image to EnlargeClick Image to Enlarge Unlike the glass tube design of traditional fluorescent lamps, these integrated LED fixtures have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.The dual 40 watt LED assemblies produce 50% more illumination than standard T5HO bulbs while offering lower amp draw and increased reliability. Each lamp produces 4,000 lumens at 100 lumens per watt, for a combined 8,000 total lumen light output. An EPL-48-2L-T5HO explosion proof fluorescent light, with a combined total of 104 watts, draws 0.87 amps at 120 volts AC. This LED version of the same light, with a total of 80 watts, draws only 0.67 amps at 120 volts AC.Energy Consumption ComparisonT5HO T8 LEDWattage 108 watts 64 watts 80 wattsAmp Draw @ 120V AC 0.90 amps 0.54 amps 0.67 ampsAmp Draw @ 220V AC 0.49 amps 0.29 amps 0.36 ampsAmp Draw @ 240V AC 0.45 amps 0.27 amps 0.33 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.29 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 6.67 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 3.34 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursOperation cost per year(12hs/day @ 12c/kWh) $56.77 $33.64 $42.04Our EPL-48-2L-ITG-LED-347V LED light fixture is NRTL Listed for United States and Canada and approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Suggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional InformationEPL-48-2L-ITG-LED-347V Explosion Proof LED Fixture Ratings/ApprovalsLamp Technology: LED Class I, Division 1 Groups C,DLamp Quantity: 2 Class I, Division 2 Group A,B,C,DDimensions: W-11.25" x L-52" x H-8.5 " Class II, Division 1&2 Groups E,F,GWeight: 55 lbs NRTL Certified to UL 595 Marine Type (Saltwater)Voltage: 347V AC, 50/60 Hz NRTL Certified to UL 844Total Watts: 80W NRTL Certified to UL 1598 Marine TypeSingle-lamp Watts: 40W Certified Canadian StandardsTotal Lumens: 8,000 lms Listed for Paint Spray BoothsSingle-lamp Lumens: 4,000 lms California Title 24 CompliantLuminous Efficiency: 100 Lm/W IP67 Rated - WaterproofLED Lamp Life Expectancy: 50,000+ Hours T6 Temperature RatingColor Temp: 5000K NEMA 4XColor Rendering Index: >80 LEL Listed LED LampsLamp Type: - Approved for Confined SparesLamp Base: - Silicone FreeReplacement Lamp: - Factory Sealed FixtureBeam Angle: 150¡ Individually Dimmable LampsPower Efficiency: 90% Lighting Configuration: Flood Pattern Power Efficiency: >0.95 Power Factor: - Amps: 0.23A @ 347V Ambient Operating Temp Range:-30¡ C to +85¡C Operating Temp Rating: T6 Rated Minimum Operating Temp: -30¡C Maximum Case Temp: +90¡C Special Orders- RequirementsHousing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Contact us for special requirementsLens Material: Hardened Borosilicate Glass Tubes Toll Free: 1-800-369-6671Gasket Material: Buna Rubber O-Rings Intl: 1-214-616-6180Mounting: Surface Standard - Pendant Optional Fax: 1-903-498-3364Wiring Hub: 1/2" NPT E-mail:[email protected]