Larson Electronics Hazardous Location 1080p High Speed PTZ Camera - C1D2 - 2MP, 3X Zoom - NEMA 3/4

The HAL-CMR-IP-POE-PTZ-2MP Hazardous Location Camera offers discreet and active monitoring inside hazardous locations. This NEMA-rated device generates clear images at 1920 x 1080 resolutions. The corrosion-resistant unit is protected by a copper-free aluminum housing and polycarbonate lens. Operators can mount the POE hazardous location camera on walls or ceilings and via pendant configurations. Camera Features: The HAL-CMR-IP-POE-PTZ-2MP is designed to allow operators to have a live feed from inside a tank, reactor, vessel or other workplace observation in hazardous locations. The explosion proof camera is capable of capturing images at 1920 x 1080 resolutions (2 megapixels). Featuring pan, tilt and zoom controls, the day/night unit offers up to 3x zoom for far-flung targets. Operators can power the monitoring device via POE or wall outlet. Alternatively, a network cable can be used to power the unit, when connected to POE-enabled devices, such as a POE NVR or POE switch. Our explosion proof cameras with Power over Ethernet (PoE) features enable data transfers and power to be passed through a single Ethernet cable that is usually a Cat 3/Cat 5 cable or better. There are several types of PoE, which come with their own respective standard and maximum power to port capabilities. The IEEE 802.3af PoE standard, with a voltage range of 44.0 - 57.0V, offers 15.4W of DC power for each port. The IEEE 802.3at PoE standard, with a voltage range of 50.0 – 57.0V, provides up to 30W of DC power per port, which is ideal for surveillance cameras, antennas and network access points. The IEEE 802.3bt PoE standard, with a voltage range of 50.0 – 57.0V, provides 60W of DC power for each port. In order to utilize PoE properly, the components, such as the receiving unit and sending device, must be PoE compliant. This explosion proof camera is constructed of copper-free aluminum with a polycarbonate lens. Operators are provided access to a total of four NPT hubs for wiring and/or mounting. The NEMA-rated unit can be mounted on walls or ceilings and via pendant configurations. Applications: Vessel, tank and reactor monitoring, remote observation of external facilities, monitoring of cleaning, spray patterns, mixing, foaming, reaction, and level. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-CMR-IP-POE-PTZ-2MP Hazardous Location Remote Observation Camera Ratings Dimensions: 10" H x 6" OD Class I, Division 2, Groups A, B, C, D Camera Weight: - Class I, Zone 2, Groups IIC, IIB, IIA Voltage/Power: POE NEMA 3, 4 Video Framerate: 1080p @ 30fps PTZ/POE Outdoor Camera Image Sensor: 1/2.9" CMOS Day/Night Effective Pixels: 1920(H) * 1080(V) Megapixels: 2MP Video Compression: H.264 Ambient Operating Temperature: -40¡C to +65¡C Special Orders- Requirements Housing: Copper-free aluminum w/ Electrostatically Applied Epoxy/polyester Finish Contact us for special requirements Lens: Polycarbonate Phone: 1-214-616-6180 Mounting: Wall, Ceiling or Pendant Toll Free: 888-325-4448 Wiring Hub: (4) Fax: 1-903-498-3364 Network Cable: Cat 5/6 E-mail: [email protected] Down to Purchase-