Larson Electronics Explosion Proof Stepdown Transformer - Converts 120/277V AC to 12V DC - 25' Cord w/ EXP Plug

Made in Texas The Larson Electronics EPL-TX-16A-EPO-12V-25-EPP explosion proof stepdown transformer converts commonly used 120-277V AC electrical current to 12V DC at 16 amps. This converter is designed to be hardwired into electrical supplies where the voltage is typically within the 100-277V AC range and steps it down to 12V DC, allowing operators to use standard AC power to operate equipment that require 12 Volt DC current. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features:This explosion proof 192 watt power converter provides a safe and effective way for operators to tap into and utilize common 100 to 277 Volt AC power sources and convert this current to 12 Volts DC for use with equipment that requires 12 volt electrical power within classified environments. This unit can be operated with input current ranging from 100 to 277 VAC and will output 192 watts at 16 amps on a 12 Volt DC current. This explosion proof power converter features an IP67 rated waterproof cast aluminum housing, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage. This explosion proof stepdown transformer has a universal input voltage ranging from 100V through 277V AC 50/60Hz. This includes commonly found voltages such as 120V, 220V, 230V, 240V, and 277V AC input that are stepped down to 12V DC output. A convenient backplate with carrying handle makes for easy mounting, placement, and transportation of the unit. Explosion Proof Outlet:The 20 amp rated power receptacle used on the EPL-TX-16A-EPO-12V-25-EPP is ideal for operators seeking a high quality, wet area rated power receptacle suitable for use in industrial and manufacturing applications. This unit`s power receptacle is constructed of copper free aluminum and the housing is malleable iron. The unit is factory sealed and any arcing is safely contained with the interior of the receptacle. The receptacle contacts are deep recessed to avoid accidental contact. Available in either a 5-15/5-20 or a 6-15/6-20 configuration to fit the operator`s specific needs. Click Photos to Enlarge With this explosion proof outlet, the step-down transformer can be used in a variety of hazardous locations. The outlet is a twistlock design. The deep recessed contacts in the receptacle housing prevents ordinary and wet location plugs from activating the explosion proof outlets. 125V 5-20P Explosion Proof Straight Blade Plug 250V 6-20P Explosion Proof Straight Blade Plug 125V 5-15/20 Explosion Proof Outlet Outlet accepts 15A and 20A Explosion Proof Plugs Outlet accepts 6-15P and 6-20P Explosion Proof Plugs The iron housing is finished in a triple-coat zinc electroplate, chromate and epoxy powder coat while the receptacle is finished with an epoxy powder coat. This unit is designed to withstand wet and corrosive conditions such as those found in docks and shipyards and comes with a spring loaded receptacle door to prevent ingress of water and contaminants when the unit is not in use. Line-In:This explosion proof step-down transformer is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-TX-16A-EPO-12V-25-EPP Explosion Proof Stepdown Transformer Ratings Primary Voltage: 120-277V AC, 50/60Hz Class I Divisions 1 & 2 Groups C, D Line-in Cable: 25` 16/3 SOOW Cable Class II Divisions 1 & 2 Groups F, G Line-in Cord Cap:5-15P (110-125V), 5-20P(110-125V), 6-20P(208-250V) Class III Secondary Voltage:12V DC IP67 Rated Waterproof Secondary Outlets: 5-15/5-20 or 6-15/6-20 NEMA 3, 3R, 7CD, 9FG Amperage Capacity:16A Wattage Capacity: 192W Special Orders- Requirements Efficiency: 92% Contact us for special requirements Protection: Short Circuit and Overload Toll Free: 888-325-4448 Dimensions: 28"L x 8"W x 6"H Weight: 25 lbs E-mail: [email protected] Down to Purchase-