Larson Electronics Explosion Proof Spider Box - 120V - (4) 20A Outlets - APJ3385-S4 connector

Made in Texas This explosion proof spider box enables operators to power up to four 120V explosion proof tools or equipment via a single grid access service, with circuit breaker protection. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION SYSTEMS OR SUBSTATIONS* Line-in power is provided by an APJ3385-S4 connector and a 10/3 SOOW cable from the 120V power source to an EIBA3020 Class 1 Division 1, Groups B, C, and D circuit breaker enclosure with 20-amp circuit breaker. The breaker enclosure protects an ECR22201 two gang 20-amp feed through receptacle and an ENR22201 two gang 20-amp dead end receptacle. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The entire assembly is mounted on a powder coated aluminum frame supported by 1-inch square tubing. Portability is provided by 8-inch run flat tires. The entire assembly can be easily tilted back and moved around. The cart features a built in cord wrap for manual cable management of the 50` line-in cable during storage and transportation. Larson Electronics is a manufacturer of power distribution systems and can custom build power distribution systems to your requirements. If this unit does not meet your needs please contact 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EPSB-MGL-4X120.20A Explosion Proof Power Distribution Amps Line In: 120V Ratings: Class 1 Division 1, Groups B, C, D Line-in Cable: 50’ 10/3 SOOW and APJ3385-S4 Certifications: UL 1640 Circuit Protection: C1D1 EIBA3020 Enclosure with 20A circuit breaker Secondary Receptacles: ENRC22201 FT and ENR22201 DE C1D1 Special Orders- Requirements Form Factor: Powder coated aluminum dolly cart with run-flat wheels Contact us for special requirements Dimensions: 40”W X 40”D X 48”H Toll Free: 888-325-4448 Weight:200 pounds Intl: +1-214-616-6180 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase