Larson Electronics Explosion Proof Power Distribution - 37.5 KVA - 480V Pri - 120V Sec - (10) Explosion Proof Outlets

Made in Texas The Larson Electronics EPL-MGS-480V-100A.3P-37.5KVA-200A-10X120V explosion proof power transformer substation converts 480V AC three phase electrical current to single phase 120V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. This substation is equipped with a C1D1 disconnect, a C1D2 480V to 120V 37.5 KVA encapsulated transformer, C1D1 200-amp main panel, and ten 20-amp, 125V C1D1 receptacles. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The 20’ #4 SOOW line-in cable brings 480V power to the 100-amp Class 1, Division 1 main disconnect, which is fused at 100 amps and is protecting the 37.5 KVA transformer. The Class 1, Division 2 resin encapsulated transformer converts 480V 3-phase power to 120V single phase and passes the current to the secondary panel. The Class 1, Division 1 200-amp main circuit breaker panel contains ten 20-amp, 120V breakers protecting ten Class 1, Division 1 20-amp 5-20 receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 1/4" thick non-sparking aluminum plate mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square non-sparking aluminum tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, 6" anti-static locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel or hot dip galvanized steel. Larger units are available upon request and can be equipped with skids or trailer mounted. The C1D1 explosion proof main panel houses a 200-amp main breaker protecting the secondary circuit and ten 20-amp breakers protecting the explosion proof receptacles. Ten 20-amp 125V C1D1 explosion proof receptacles allow operators to power up to ten devices equipped with 5-15P or 5-20P explosion proof cord caps. The C1D1 receptacles are of a spring loaded and twist lock design. Operators must push the C1D1 plug deep into the receptacle and twist, locking it into place before the plug will make electrical contact. This ensures no arks can occur outside of the enclosure. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge A top located picking eye allows for crane and air transport Skid pockets allow operators to move this unit via forklifts or skid steers within the job site. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing, fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. These power distribution systems are popularly used in applications where external power sources are often necessary. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-2X480.60-30K-16X120.20-2X208.30 Power Distribution System Line In: 20’ of #8 4C SOOW cable w/ Blunt Cut End Max Primary OCP: 100A @ 480V Primary Voltage: 480V 3P Max Secondary OCP: 208A @ 240V Primary Disconnect: 100A Fused at 100A UL 1640 Transformer: 37.5KVA 480V to 240/120 Resin Encapsulated C1D1 Primary Disconnect Secondary Panel: 200A MCB 1P 240/120V C1D2 Encapsulated Transformer Secondary Breakers: (20) 20A (120V RCPT) C1D1 Secondary Panel Secondary Outlets: (10) 20A 5-15R / 5-20R C1D1 Explosion Proof Outlets Ten C1D1 1523 EXP Outlets Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 6”anti-static casters Special Orders- Requirements Dimensions: 48”L X 48”W X 64”H Contact us for special requirements Weight: 1200lbs Toll Free: 888-325-4448 Intl: 1-903-270-1187 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase