Larson Electronics Explosion Proof Power Distribution - 1000 VA - 120/240 VAC Stepdown to 24V AC/DC - 50M Cable

Made in Texas The Larson Electronics EPL-220X24-TX4 explosion proof power transformer converts 220VAC at 50/60hz to 24 VDC and is ideal for powering 24 volt DC or AC based lights and equipment. This 1000VA system delivers 41 amps on 24 Volts AC or DC (customer choice). *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The EPL-220X24-TX4 explosion proof power transformer from Larson Electronics is built to provide operators in hazardous locations with a safe and reliable explosion proof approved source of low voltage 24 volt AC or DC power. This compact power distribution transformer is designed for portability and convenience as well as durability and is mounted to a non sparking aluminum frame with non-sparking casters for added protection. This portable AC to DC transformer features four Class I, Division 1 and Class 2 Division 1 receptacles with twist lock operation to provide protection against sparking in hazardous environments. The EPL-220X24-TX4 portable power distribution system converts primary 220/230/240 VAC electrical current into 24 Volts through its secondary output. The output side is equipped with four Class 1, Division 1 (and Class 2 Division 1) receptacles designed to accept twist lock style explosion proof plugs. This power transformer is 220V/30Amp rated and comes standard with 50 meters (165`) of SOOW cord terminated with a explosion proof plug. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EPL-220X24-TX4 Explosion Proof Power Transformer Ratings/Approvals Line In: 110-125V or 220-240V 50/60 Hz Class 1, Division 1 Line-In Cable: 50 meters (165`) 16/3 Explosion Proof SOOW Cord Class 2, Division 1 Line-In Cord Cap: 5-15P (125V), 5-20P (125V) or 6-20P (250V) - EXP Plug Class 3 Line Out: Four Class 1/2, Div. 1 Receptacles 24V UL 1640 Primary: 120VAC or 240VAC (Choose below) Secondary: 24 Volts AC or DC (Choose below) @ 41 amps Special Orders- Requirements VA: 1000 Contact us for special requirements Weight: 75lbs Toll Free: 888-325-4448 Mounting: Portable Cart w/ Casters E-mail:[email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase