Larson Electronics EPP-30A-30FT-BCE Explosion Proof Plug This explosion proof pin and sleeve plug is compatible with our EPO-30A power receptacles. This plug is rated for 30 amps and is approved Class I, Division 1 and 2, Groups C, D. This explosion proof plug features non sparking aluminum construction, recessed brass contacts to prevent accidental contact, and a 120-250VAC @30 amps current rating. This plug is dsigned to lock into our EPO-30A receptacles by pushing the plug into the receptacle, moving the sliding lock to the side, then pushing the plug in the rest of the way to fully seat and lock it into place. This C1D1 plug comes factory installed with 30` of 10/3 SOOW cable and a blunt cut end. Inter-Compatibility: These plugs are are cross-interchangeable with Appleton CPH plugs and will work with Powertite¨ Series receptacles, Crouse Hind receptacles under catalogue number "CES2214", and receptacles. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Motor-Generator Sets, Compressors, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPP-30A-30FT-BCE Explosion Proof PLug Certifications - Compliance Amp Rating: 30 Class 1 Division 1 & 2 Groups C & D Dimensions: 8.44"-L 3.06"-W Class 2, Div. 1 & 2 Configuration: 4 Pole 3 Wire NRTL Certified to UL Standard: NRTL Certified to UL 1010 (NRTL Certified to UL 1203), NRTL Certified to UL 894, NRTL Certified to UL 1682, NRTL Certified to UL 1686 Suitable Cable Diameter: .390" to 1.375" CSA Standard: C22. No 30, C22.2 No. 159, C22.2 No 182.1 Compatibility: EPO-30A, Appleton Powertite¨, Crouse Hind-CES2214, Hubbell-Killark-KR Series 30 amp Cable Locking: Mechanical Cable Clamps Special Orders- Requirements Plug Type: Pin and Sleeve Contact us for special requirements Voltage: 125-250VAC Toll Free: 888-325-4448 Cable: 30 feet 10/3 SOOW w/ blunt cut end Fax: 1-903-498-3364 E-mail: [email protected]
Larson Electronics Explosion Proof Plug - Class I, Div. 1 & 2 - Class II, Div. 1 & 2 - 30 Amp Rated - 30FT - Blunt Cut
Larson Electronics
(No reviews yet)
Write a Review
Write a Review
Larson Electronics
Larson Electronics Explosion Proof Plug - Class I, Div. 1 & 2 - Class II, Div. 1 & 2 - 30 Amp Rated - 30FT - Blunt Cut
- SKU:
- EPP-30A-30FT-BCE
- UPC:
- Weight:
- 0.00 LBS
!