Larson Electronics Explosion Proof LED Drop Light / Trouble Light -10 Watt LED - 100' Cord - Pin/Sleeve EXP Plug

Made in the USA The Larson Electronics EHL-LED-7W-100-CPP516 Explosion Proof LED Drop Light / Trouble Light is UL Listed Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. This 10 watt explosion proof LED work light produces 1050 lumens of bright white light and comes complete with 100 feet of explosion proof cord. The EHL-LED-7W-100-CPP516 LED drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. These particular units also come standard with an explosion proof pin/sleeve cord cap. The plug is Class 1, Division 1 & 2 and Class 2, Division 1 & 2 rated. In order to complete the seal, operator must take the pin/sleeve explosion proof plug and connect to an appropriate pin/sleeve explosion proof outlet receptacle. Connecting to a regular 120VAC outlet renders the plug useless and should only be done when connecting the light outside of the explosion proof environment. 100 Watt Incandescent Bulb With the EHL-LED-7W-100-CPP516 Click Photos to Enlarge Click Photos to Enlarge This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1050 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes complete with 100’ of SOOW 16/3 AWG cord ending in a 2-pole, 3-wire 125/250V pin and sleeve explosion proof cord cap. This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when the transformer becomes entangled in the cord. This explosion proof LED hand light operates on standard 120-277 Volts AC Hz for US voltages. We also offer a low voltage model that operates on 11V ACor 25V AC. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or fluorescent lamps, resulting in a lamp housing that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 10 Watt 1050 Lumen LED Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Blue and Gray paint finish.6. UL Class1 Div1 Class 2 Div1 7. 120-277 Volt AC or 11V AC or 25V AC Operation8. SOOW cable.9. Aluminum Hook for Convenient Placement.10. Explosion Proof Pin/Sleeve Plug 10 watt LED light produces 1050 lumensNon-sparking aluminum housing50,000 hour LED LampMolded rubber bumper guardAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operationExplosion proof cordExplosion Proof Twist-Lock Plug Specifications / Additional Information EHL-LED-7W-100-CPP516 U.L. Ratings UL Listing: United States Class 1, Division 1 & 2 Groups C, D Dimensions:L-16.5 " Dia-5" Class 2, Division 1 and 2 Groups F, G Lumens: 1050 Total Watts: 10 watts Voltage: 120-250V AC or 11V AC or 25V AC Color Temp: 6000K Special Orders- Requirements Mounting: Aluminum Hook Contact us for special requirements Wiring: 100` SOOW Cord With Pin/Sleeve Explosion Proof Plug Toll Free: 888-325-4448 Lamp Type:: LED YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase- Same Day Shipping on This Light!