Larson Electronics Explosion Proof Enclosure - 10"x10"x6" Internal Dims - C1D1 - Surface Mount - (2) 3/4" NPT Hubs

The Larson Electronics EPL-AEB-10.10.6-2X0.75 Explosion Proof Enclosure provides operators with a Class I and II, Divisions 1 and 2 copper-free aluminum enclosure designed to hold electrical equipment up to 10" by 10" by 6" in size. Equipped with two 3/4" NPT hubs, this NEMA 4X rated explosion proof enclosure is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSION PROOF ENCLOSURES* The EPL-AEB-10.10.6-2X0.75 explosion proof enclosure is made of copper-free aluminum and includes a watertight gasket for a NEMA 4X protection rating. The internal cavity of this flameproof enclosure measures 10" in length by 10" in width by 6" in height. This unit caters to a maximum of 9 operators on the lid (3 rows of 3 = 9) and a maximum conduit size of 3". Equipped with a bolted cover, the grey explosion proof accessory is compatible with surface-mount applications. The explosion proof enclosure is designed for Class I, Divisions 1 & 2 (Groups B,C,D); Class I, Zones 1 & 2 (Groups IIB+H2,IIA); Class II, Divisions 1 & 2 (Groups E,F,G) and Class III rated combustible sites. The NEMA 4X rating makes the unit suitable for both indoor and outdoor applications, as well as ensures protection from water, dust, moisture, dirt and external ice formation. A removable backplate for easy mounting of equipment outside of the enclosure can be provided at an additional cost. Hubs: The EPL-AEB-10.10.6-2X0.75 contains a total of two 3/4" NPT hubs. One 3/4" NPT hub is located on the east side and one 3/4" NPT hub is located on the west side of the explosion proof enclosure. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting Systems, Oil and Gas, Marine Sites, Textile, Food Processing, Chemical Storage, Wet areas or Locations Where Combustible Dust is Present. At Larson Electronics, we can build enclosures to your specifications. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information EPL-AEB-10.10.6-2X0.75 Explosion Proof Enclosure Ratings External Dimensions: 15.25" x 8.9" x 15.25" Class I, Divisions 1&2 Groups B,C,D Internal Dimensions: 10”-L x 10”-W x 6”-H Class I, Zones 1&2 Groups IIB+H2,IIA Pan Dimensions: 9" x 9" Class II, Divisions 1&2 Groups E,F,G Available Dimensions for Devices: 10" x 10" x 6.20" Class III Weight: 92 lbs NEMA 3, 4, 4X Maximum Conduit Size: 3" CENELEC/ATEX/IEC Ex Maximum Operators on Lid: 3 Rows of 3 = 9 Ex d IIB + H2 T5 or T6 Mounting Leg Height: 0.25" Ex tD A21 IP66 Mounting Dimensions (Horizontal) Height: 12.94" Tamb = + 60¡C Mounting Dimensions (Horizontal) Width: 4.94" Mounting Dimensions (Vertical) Height: 4.94" Mounting Dimensions (Vertical) Width: 12.94" Cover Type: Bolted Materials: Copper-free Aluminum Mounting: Surface Mount Backplate: N/A Hinges: N/A Total Hubs: 2 Special Orders- Requirements Hub Size: (2) 3/4" NPT Contact us for special requirements Hub Location: (1) 3/4" NPT @ East Side, (4) 3/4" NPT @ West Side Phone: 1-214-616-6180 Color: Grey Toll Free: 888-325-4448 Shipping Dimensions: 48"-L x 48"-W x 23.25"-H Fax: 1-903-498-3364 Shipping Weight: 147 lbs E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*