Larson Electronics Explosion Proof Control Station - 63A 2P MCB w/ Operation Handle - Analog Voltmeter - NEMA 4X

The EPCS-36AMB-8XSW-VM-ID.G-1XM25-10XM20 Explosion Proof Control Station is suitable for Class I, Division 1 & 2; Class II, Division 1 & 2; and Class III locations. This ATEX-rated unit features a 63-amp, 2-pole main circuit breaker with an operation handle. Operators are provided access to an analog voltmeter, twenty din rail mount terminals and eight on/off selector switches. Constructed of copper-free aluminum, the explosion proof station is finished in aluminum lacquer paint for robust durability. The EPCS-36AMB-8XSW-VM-ID.G-1XM25-10XM20 is an explosion proof control station for flammable facilities and combustible environments. This unit consists of a 63-amp, 2-pole main circuit breaker with an operation handle. On the secondary side of the main circuit breaker, twenty, 2.5mm sq din rail mount terminals are available for completing connections. Operators can access to a total of eight, on/off selector switches and one, analog voltmeter (0-5V). A green indicator light provides the status of the explosion proof control station during use. The EPCS-36AMB-8XSW-VM-ID.G-1XM25-10XM20 is constructed of copper-free aluminum, with an aluminum lacquer paint finish. Hardware components are made out of stainless steel and aluminum (hinges, located on the left side of the enclosure). The NEMA-rated unit is corrosion resistant for durability in rugged environments and features a bolted cover. Mounting/Hubs: This explosion proof control station can be mounted on flat surfaces or walls and comes with a mounting pan. One, M25 hub and ten, M20 hubs are available at the bottom of the enclosure. All hubs are equipped with cable glands. Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPCS-36AMB-8XSW-VM-ID.G-1XM25-10XM20 Explosion Proof Control Station Ratings/Approvals Type: Explosion Proof Control Station Class I, Div 1 & 2 Groups B,C,D Dimensions: 10" x 10" x 6" Class I, Zone 1 & 2 IIB + H2 Panel: 63A 2P MCB w/ Operational Handle Class II, Div 1 & 2 Groups E,F,G Voltmeter: Analog, 0-5V Class III Selector Switches: (8) On/Off NEMA 3, 4, 4X Indicator Light Color: Green CENELEC/ATEX/IEC Ex Terminals: (20) 2.5mm sq @ Secondary Side of MCB Ex d IIB + H2 T5 or T6 Materials: Copper-free Aluminum Ex tD A21 IP66 Finish: Aluminum Lacquer Paint Tamb = + 60¡C Mount: Surface Mount Hubs: (1) M25, (10) M20 w/ Cable Glands Special Orders- Requirements Hub Location: Bottom Contact us for special requirements Toll Free: 888-325-4448 Intl: 1-214-616-6180 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*