Larson Electronics Explosion Proof 4-Outlet Extension Cord - (4) 20A Outlets - 50' SOOW Cord - 20A 2P3W EXP Cord Cap

Made in the USA The Larson Electronics EPEXC-4X-12.3-50-CPP Explosion Proof 4-Outlet Extension Cord is suitable for use in Class I, Division 1 and Class II, Division 1 work sites. This hazardous location accessory features four, in-line explosion proof receptacles at one end and a 20-amp cord cap at the other end of the unit. A 50-foot 12/3 SOOW cord is available for extending power connections. The EPEXC-4X-12.3-50-2P3W allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 50 feet of 12/3 SOOW explosion proof cord and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with four inline 20-amp, explosion proof receptacles installed on one end and a 20-amp rated 2-pole 3-wire explosion proof pin-and-sleeve style plug installed on the other end. The explosion proof cord cap on this hazardous location accessory is the EPP-CPP-516. This unit enables multiple connections from a single power source. Each receptacle`s contacts are deeply recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Click Photo to Enlarge Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, industrial, warehouse, lighting, explosion proof light fixtures, grinders, wet areas or locations where combustible dust is present. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPEXC-4X-12.3-50-2P3W Explosion Proof Extension Cord Ratings/Approvals Amp Rating: 20 amp Continuous Service Class I, Div 1 Groups C and D Dimensions: Cord-50 Feet Plug-2.78"-L 1.75"-W Class II, Div 1 Groups F and G Configuration: 2 Pole 3 Wire IP66 Cord Cap Suitable Plug Cable Diameter: .538” to .639” Receptacle Specs: (4) Inline Receptacles Configuration: 2 Pole 3 Wire Materials: Copper Free Aluminum Dims:- Single Receptacle- 3"-W X 5.69"-D X6.13"-H Mating Plugs: ****EPP-15A, EPP-20-A**** Special Orders- Requirements Finish: Epoxy Powder Coat Contact us for special requirements Cord Cap: 20A EXP Pin/Sleeve Arktight Plug - EPP-CPP-516 Toll Free: 888-325-4448 U.L. Certification Fax: 1-903-498-3364 E-mail: [email protected]