Larson Electronics Explosion Proof 200' Extension Cord w/ 30 Amp Continuous Service - Extra Exp. Proof Plug

Larson Electronics 30 Amp, Continuous Service, 200` Explosion Proof Extension Cord Rated Class 1 Division 1- Groups C & D and Class 2 Division 1 Groups F, & G. The Larson Electronics EPEXC-200-30A-P Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 200 feet of 4/3 SOOW explosion proof cord rated at 30 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof, 30 amp receptacle installed on one end and an explosion proof 30 amp plug installed on the other end. We also include an extra matching 30 amp plug for operators to attach to their equipment which allows them to avoid any issues with plug/receptacle-equipment compatibility with this cord. The plug on this cord can only be used in pin and sleeve style receptacles and will not work in standard electrical outlets. The plugs on these units are of a sliding lock design. In order for a secure and working connection to take place, the operator must first slide the plug into the receptacle to the first stop, slide the locking mechanism to the right, then fully insert the plug until it locks into place. This ensures a safe seal is made and that the plug cannot be accidentaly pulled free from the receptacle. To ensure the highest safety, operators should make connections outside of the hazardous area. The receptacle contacts are deep recessed to avoid accidental contact and contain brass contacts designed to exert constant pressure to ensure a secure connection. Ordinary location plugs will NOT activate this cord`s explosion proof receptacle. EPEXC-200-30A-P Plug EPEXC-200-30A-P Receptacle Inter-Compatibility: These cords use Pin and Sleeve plugs and are cross-interchangeable with Crouse Hind™ Arktight series plugs and receptacles part# CES2214 and Hubble-Killiark part# KRJ-304 KR Series plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-200-30A-P Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 30 amp Continuous Service Class 1 Div 1 & 2 Groups C and D Dimensions: Cord length-200 Feet Plug-8.44"-L 3.06"-W Class 2 Div 1 Groups F and G Configuration: 4 Pole 3 Wire Suitable Plug Cable Diameter: .390-1.375” Receptacle Specs: Configuration: 4 Pole 3 Wire Materials: Copper Free Aluminum/Malleable Iron Dimensions: 4.69"-W X 4.94"-D X 8.31"-H Mating Plugs: ****EPP-30A**** Special Orders- Requirements Grounding: Shell and Extra Pole Contact us for special requirements Seals: Factory Sealed- No External Seals Needed Toll Free: 888-325-4448 Finish: Epoxy Powder Coat Fax: 1-903-498-3364 U.L. Certification E-mail: [email protected]