Larson Electronics 50 Watt Portable Explosion Proof Mini LED Brick Light - C1D1/C2D1 - Aluminum Frame - 120-277V

Made in Texas The EPL-PM-50LED-100 Explosion Proof LED Brick Light from Larson Electronics is rated Class I Divisions 1 and 2 Groups C D and Class II Divisions 1 and 2 and uses a 7 inch LED light head to produce 6,250 lumens of light while drawing only 50 watts. The EPL-PM-50LED-100 explosion proof LED Brick Light provides 4,000 square feet of work area coverage with 6,250 lumens of light output. This portable LED light is mounted to an A-frame style aluminum base and has an adjustable LED light head measuring 7 inches square. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. This explosion proof LED light fixture is comprised of a 7 inch wide square LED light head mounted within a portable base stand fabricated from non sparking aluminum with a convenient carrying handle built into the top of the stand. The aluminum A-frame is powder coated with glossy blue finish for corrosion resistances and aesthetics. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Light Head Information: This Class I Division 1 2, Class II Division 1 2 explosion proof light fixture provides 6,250 lumens of high quality light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% lumen retention. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPL-PM-50LED-100 to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights. Click Photos to Enlarge 60¡ Beam Angle 125¡ Beam Angle Plug 140¡ Beam Angle Plug Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60¡ beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125¡ beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140¡ beam offers a very wide lighting pattern and is ideal for situations where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140¡ beam is great for situations that call for working in close proximity to lights such as in a paint booth. This 50W explosion proof LED high bay produces a total of 6,250 lumens with a color temperature of 5600K standard and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 86.67 lumens per watt effective lumen output and have a 80% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources. Field Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-PM-50LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure. Energy Consumption Comparison Metal Halide LED Wattage 175 watts 50 watts Amp Draw @ 120V AC 1.69 amps 0.42 amps Amp Draw @ 220V AC 0.92 amps 0.23 amps Amp Draw @ 240V AC 0.85 amps 0.21 amps Amp Draw @ 277V AC 0.73 amps 0.18 amps Amp Draw @ 12V DC 16.77 amps 4.17 amps Amp Draw @ 24V DC 8.39 amps 2.08 amps Lamp Life Expectancy 20,000 hours 50,000+ hours Operation cost per year(12hs/day @ 12c/kWh) $241.78 $26.30 Each LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. Voltage: This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring Plug: This explosion proof portable flood lighting system is equipped with 100 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Suggested Applications: This pedestal base stand explosion proof light is ideal for any application Class II II, Division 1 2 explosion proof or hazardous location environment requiring durable and quality lighting in a portable form factor. Click Here to view our 150 watt 13,000 lumen unit Applications include but not limited to aircraft maintenance, alcohol processing, aerospace, chemical manufacturing, coke processing, cold storage, compressed natural gas (CNG) facilities, cranes, cryogenics, distilleries, food processing (with food grade gasketed polycarbonate lens: EPL-HB-150LED-RT-188), fuel storage, gas processing plants, grain processing, laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine vessels, methane production, mining, offshore, oil drilling rigs, oil refineries, paint spray booths, paper processing, petrochemical, pharmaceuticals, power plants, production refineries, sand blast cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas, storage facilities, tank farms, tankers, textile, washdown areas, waste treatment plants, and woodworking. Click here to read the NEC description for explosion proof and hazardous locations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits 1.Approved Class I Divisions 1 and 2 Class II Divisions 1 and 2.2. Led lamp head requires no lamping.3.Durable Base Mount constructed of copper free aluminum. 4. No ballast box. No ballast to replace.5. Extreme long life LEDs reduce maintenance and replacement costs.6. Adjustable LED light head. 7. 5000K Color Temperature and Color Rendering Index of 758. 6,250 Lumens produced from only 50 watts.9. Mercury free shock proof LED lamp light head. 1. 50,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off - No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPL-PM-50LED-100 Explosion Proof LED Brick Light Quick Summary Lamp Type: LED Listed for United States and Canada Dimensions: 8.38" W x 9.56" D x 17.25" H Class I Divisions 1 2, Groups C and D Total Weight: 15 lbs Class II Divisions 1 2, Groups E, F and G Voltage: 100-277V AC 50/60Hz or 11-25V AC/DC Certified to UL 1598 Total Watts: 50 watts Certified to C22.2 No. 137 Rev 2009 Total Lumens: 6,250 Certified to C22.2 No. 250.0 LED Lamp Life Expectancy: 50,000 Hours T5 Temperature Rating Color Temp: 5000K Paint Spray Booth Approved Color Rendering Index: >75 CRI IEC 60529 Tested Beam Angle: 60¡ or 125¡ IP67 Rated Waterproof Lighting Configuration: Flood Pattern LEL Approved Power Efficiency: >95% Multiple Driver Banks Power Factor: 0.992 80% Lumen Retention after 50,000 Hours Amperage: 2.5A @ 120V, 1.26 @ 240V, 1.08 @ 277V Factory Sealed Light Fixture Ambient Operating Temp Range: -50¡C to +65¡C 100 Foot SOOW Cable Operating Temp Rating: T5 Direct Replacement for 400W Portable Lights Lamp Housing Material: Copper Free Cast Aluminum Stand Material: Non-Sparking Aluminum Lens Material: Hardened Borosilicate Glass Gasket Material: Silicone Mounting: Triangular Shaped Aluminum Base Stand Special Orders- Requirements Finish: Powder Coated - Gloss Blue Contact us for special requirements Wiring: 100` 16/3 SOOW Cord Explosion Proof Cord Cap Toll Free: 1-800-369-6671 Cord Cap: 5-15 Straight (120V), 5-20 Twist (120V), or 6-20 Twist (250V) Explosion Proof Plug Intl: 1-903-270-1187 Warranty: Yes - 5 Year - 10 Year Warranty Available E-mail: [email protected] Scroll Down to Purchase-