Larson Electronics 36W Explosion Proof Fluorescent Fixture - (2) 4' 18W Lamps - 220/240V AC - ATEX/IECEx

The ATEX-HALP-48-2L-T8-2X18W Explosion Proof Fluorescent Fixture from Larson Electronics is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This 36-watt unit is equipped with two, 4-foot lamps that operate on 220-240V AC. The IP66-rated fixture is made out of non-sparking materials that are highly resistant to rough impacts (IK10). This fluorescent lamp can be mounted on ceilings or walls using a pair of stainless steel mounting brackets. The ATEX-HALP-48-2L-T8-2X18W is designed for use in hazardous locations and flammable buildings that require ATEX/IECEx rated fixtures. Consisting of two, 4-foot fluorescent lamps, the cold start unit is compatible with 220-240V AC, while consuming 36 watts (18 watts per lamp) during operation. A flood beam configuration ensures full coverage of the location when the light is in use. The lamp carries a T4 temperature rating. A NC switch provides all-pole disconnection when the unit is opened. This ATEX-rated fluorescent fixture is constructed of non-sparking materials for protection in flammable work sites. The housing on the unit is made out of glass fiber-reinforced polyester resin with polycarbonate lens and silicon foam gaskets. The IP66 unit offers exceptional resistance to hard impacts (IK10), with a threshold of 20 joules. Operators can lock the lamp using a small socket key (M8/wrench size 13). Mounting: The ATEX-HALP-48-2L-T8-2X18W is compatible with wall or ceiling mount installations. Each fixture is equipped with two M25 hubs on either side of the lamp for completing electrial connections. When a stainless steel mounting bracket is attached to the luminary for mounting, it can be swiveled in increments of 15 degrees for accurate targeting. Suggested Applications: Petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants, marine loading docks, shipyards, ports and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information ATEX-HALP-48-2L-T8-2X18W Hazardous Location Lamp Ratings/Approvals Lamp Type: Fluorescent IECEx PTB 13.0003 Dimensions: 62.4" x 7.2" x 4.9" Ex d e IIC T4 Gb or Ex db eb IIC T4 Weight: 14.9 lbs Ex tb IIIC T80¡C Db or Ex tb IIIC T80¡C Voltage: 220-240V AC 50/60 Hz PTB 13 ATEX 2004 DC Voltage: 198-264V DC (Switching On), 176-264V DC (Operation) Ex II 2 G Ex d e IIC T4 Gb or Ex db eb IIC T4 Total Watts: 36W (18W per Lamp) E II 2 D Ex tb IIIC T80¡C Db or Ex tb IIIC T80¡C Lamp Life Expectancy: 24,000 Hours Central Locking Beam Angle: Flood IP66 Ambient Operating Temp Range:-30¡C to +50¡C Operating Temp Range: T4 Rated Housing Material: Polyester and Glass Fiber Housing Special Orders- Requirements Gasket Material: Silicone Contact us for special requirements Lens Material: Polycarbonate Toll Free: 888-325-4448 Mounting: Ceiling or Wall Wiring Hub: (2) M25 Hubs on Side E-mail: [email protected]