Ideal Industries 92-691 InSITEª RTQª 90¡RG-6 F Compression Connector -5 pk
Connector Model: 6FRAISRTQ, Features InSITE Technology, Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Quad Plenum coax cables, Center conductor range: All, Dielectric diameter range: .168\u201d - .183\u201d, Outer jacket diameter range: .226\u201d - .305\u201d, Connector Model: 6FRAISRTQ, Features InSITE Technology, Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Quad Plenum coax cables, Center conductor range: All, Dielectric diameter range: .168\u201d - .183\u201d, Outer jacket diameter range: .226\u201d - .305\u201d, Recommended cable prep/stripping tools: 45-605 PrepPRO; 45-526, Recommended compression tool: 30-793 OmniSeal Pro XL; 33-632 Linear X 3, RTQ design allows Regular/Tri/Quad shield cables to work in a single connector \u2013 no need to carry cable specific connectors, Right angle design allows for better cable routing options behind devices and from wallplates, Designed for use in cable and satellite TV installations, WeatherProof - internal O-ring and patented back seal prevent moisture migration for indoor/outdoor use, Return loss: >25dB up to 1 GHz; >18dB up to 3 GHz, All brass, with nickel plated bodies, Designed for optimal performance on 75\u03a9 coaxial cables, Frequency range: 0 MHz to 3 GHz, >40 pounds cable retention on all models, 7/16\u201d nut diameter with 3/8-32 thread, Loosen the locknut by turning the post counterclockwise with a flathead screwdriver. With the handle in the closed position, lower the post with the screwdriver until the top of the post is even with the bottom adjustment line of the tool. Tool is now set for 90C connectors. Will compress against the top spring clip level. To reset tool to default position, close handle and raise post to the middle (longest) adjustment mark. Retighten locknut by hand, then secure it with a clockwise turn of the post.
Connector Model: 6FRAISRTQ, Features InSITE Technology, Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Quad Plenum coax cables, Center conductor range: All, Dielectric diameter range: .168\u201d - .183\u201d, Outer jacket diameter range: .226\u201d - .305\u201d, Connector Model: 6FRAISRTQ, Features InSITE Technology, Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Quad Plenum coax cables, Center conductor range: All, Dielectric diameter range: .168\u201d - .183\u201d, Outer jacket diameter range: .226\u201d - .305\u201d, Recommended cable prep/stripping tools: 45-605 PrepPRO; 45-526, Recommended compression tool: 30-793 OmniSeal Pro XL; 33-632 Linear X 3, RTQ design allows Regular/Tri/Quad shield cables to work in a single connector \u2013 no need to carry cable specific connectors, Right angle design allows for better cable routing options behind devices and from wallplates, Designed for use in cable and satellite TV installations, WeatherProof - internal O-ring and patented back seal prevent moisture migration for indoor/outdoor use, Return loss: >25dB up to 1 GHz; >18dB up to 3 GHz, All brass, with nickel plated bodies, Designed for optimal performance on 75\u03a9 coaxial cables, Frequency range: 0 MHz to 3 GHz, >40 pounds cable retention on all models, 7/16\u201d nut diameter with 3/8-32 thread, Loosen the locknut by turning the post counterclockwise with a flathead screwdriver. With the handle in the closed position, lower the post with the screwdriver until the top of the post is even with the bottom adjustment line of the tool. Tool is now set for 90C connectors. Will compress against the top spring clip level. To reset tool to default position, close handle and raise post to the middle (longest) adjustment mark. Retighten locknut by hand, then secure it with a clockwise turn of the post.
