Fluke Networks MicroScanner 2 Industrial Ethernet Cable Verifier

Fluke

$1,484.99
(No reviews yet) Write a Review
SKU:
FLUKE-Ms2-Ie
Weight:
0.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Fluke Networks MicroScanner 2 Industrial Ethernet Cable Verifier

The Fluke Networks MicroScanner2 Industrial Ethernet Cable Verifier performs continuity tests on RJ45, M12X, M12D, and M8D terminated cables in seconds and displays results graphically so you can see opens, shorts, and crossed wires.

It also reports which end of the cable has a problem and reports the distance to an open connection within the cable. Cable failures result in costly production downtime so itÕs important to quickly identify where the cable is broken so it can be replaced or repaired.

Includes Duffle Bag, Multi-Connector Adapter, Cat6A patch cord, RJ45 male to RJ45 female patch cord , RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord for testing of M12X, M12D, M8D terminated cables.



Key features

  • Graphical wire map, length, cable ID, and distance to fault
  • Test RJ11, RJ45, Coax, and Industrial Ethernet connector types
  • Locate cables with IntelliTone digital and analog toning
  • Verify 10/100/1000 Ethernet and detects PoE
  • Work in any enviroment with backlit LCD screen


Specifications apply at 23 ¡C (73 ¡F), unless otherwise noted.

Environmental specifications
Operating temperature32 ¡F to 113 ¡F (0 ¡C to 45 ¡C)
Storage temperature-4 ¡F to +140 ¡F (-20 ¡C to +60 ¡C)
Operating relative humidity (% RH without condensation)90 % (50 ¡F to 95 ¡F 10 ¡C to 35 ¡C)
75 % (95 ¡F to 113 ¡F 35 ¡C to 45 ¡C)
Shock and VibrationRandom, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
SafetyIEC 61010-1 3rd Edition
Altitude4,000 m; Storage: 12,000 m
EMCIEC 61326-1
General specifications
Test connectorsShielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.
PowerBattery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached)3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner2: 10.6 oz (300 g)
DisplayMonochrome LCD with backlight
Test modes
Cable testMeasures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. Displays results on one screen.
ToneGenerates IntelliTone and normal analog toning signals
PoEMicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices
Performance specifications
Cable types testedTwisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner2): 75 ½, 50 ½, 93 ½
Length testRange: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
Wiremap testDetects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detectionMicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
Tone generatorSupports toning and cable mapping with a Fluke Networks digital IntelliTone probe. Generates four tones compatible with typical analog probes. SmartTone feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Reviews