Fluke 1555 FC 10 kV Insulation Tester Kit
Evaluate the trends, eliminate the doubt
The Fluke 1555 insulation resistance tester kit offers digital insulation testing up to 10 kV in an industrial strength case, with all the heavy duty leads and clips you need. Plus, the Fluke Connect wireless app performs tests and collects data while you stay a safe distance away.
Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos.
Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.
Other useful features:
- Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
- CAT III 1000 V, CAT IV 600 V safety rating
- Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
- Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
- Long battery life gives the user over 750 tests between charges
- Large digital/analog LCD for easy viewing
- Capacitance and leakage current measurement
- Ramp function for breakdown testing
- Resistance measurements up to 2 T½
- Timer settings up to 99 minutes for timed tests
- 3-year warranty
Key features
- Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect¨ and a smart phone
- Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
- Report creation using Fluke Connect desktop saves time and makes test results easier to understand
- Fluke Connect saves test results to the cloud for analysis and preventive maintenance
| Electrical Specifications | ||
| The tester's accuracy is specified for one year after calibration at operating temperatures of 0¡C to 35¡C. For operating temperatures outside the range (-20¡C to 0¡C and 35¡C to 50¡C), add ±.25% per ¡C, except on the 20% bands add ±1% per ¡C. | ||
| Insulation Resistance Measurement | ||
| Test voltage (DC) | ||
| 250 V | Range | < 250 k½, 250 k½ to 5 G½ 5 G½ to 50 G½ > 50 G½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| 500 V | Range | < 500 k½ 500 k½ to 10 G½ 10 G½ to 100 G½ > 100 G½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| 1000 V | Range | < 1 M½ 1 M½ to 20 G½ 20 G½ to 200 G½ > 200 G½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| 2500 V | Range | < 2.5 M½ 2.5 M½ to 50 G½ 50 G½ to 500 G½ > 500 G½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| 5000 V | Range | < 5 M½ 5 M½ to 100 G½ 100 G½ to 1 T½ > 1 T½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| 10000 V | Range | < 10 M½ 10 M½ to 200 G½ 200 G½ to 2 T½ > 2 T½ |
| Accuracy (± reading) | Unspecified 5% 20% Unspecified | |
| Bar graph range | 0 to 1 T½ (1550C) - 0 to 2 T½ (1555) | |
| Insulation test voltage accuracy | -0%, +10% at 1 mA load current | |
| Induced AC mains current rejection | 2 mA maximum | |
| Charging rate for capacitive load | 5 seconds per _F | |
| Discharge rate for capacitive load | 1.5 s/_F | |
| Leakage current measurement | Range | 1 nA to 2 mA |
| Accuracy | ±(5% + 2 nA) | |
| Capacitance measurement | Range | 0.01 _F to 15.00 _F |
| Accuracy | ±(15% rdg + 0.03 _F) | |
| Timer | Range | 0 to 99 minutes |
| Resolution setting | 1 minute | |
| Resolution indication | 1 second | |
| Live circuit warning | Warning range | 30 V to 660 V AC/DC, 50/60 Hz |
| Voltage accuracy | ±(15% + 2 V) | |
| Software specifications | FlukeView Forms basic software requires a PC running Windows XP, Windows Vista , Windows 7 or Windows 8. | |
| General Specifications | ||
| Display | 75 x 105 mm | |
| Power | 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 | |
| Charger Input (AC) | 85 V to 250 V AC 50/60 Hz 20 VA | |
| This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only. | ||
| Dimensions | 269 x 277 x 160 mm (10.6 x 10.9 x 6.3 in) | |
| Weight | 3.7 kg (8.2 lb) | |
| Temperature (operating) | -20¡C to 50¡C (-4¡F to 122¡F) | |
| Temperature (storage) | -20¡C to 65¡C (-4¡F to 149¡F) | |
| Humidity | 80% to 31¡C decreasing linearly to 50% at 50¡C | |
| Altitude | 2000 m | |
| Enclosure sealing | IP40 | |
| Input overload protection | 1000 V AC | |
| Electromagnetic compatibility | EN 61326 | |
| Safety compliance | IEC 61010-1: Overvoltage category II, Pollution Degree 2. IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT III IEC 61557-1, IEC 61557-2 | |
