Eaton's Crouse-Hinds series MTL F101, F102 and F104 Single-Segment Fieldbus Power Supplies each provide power for a single FOUNDATION fieldbusª H1 segment. Galvanic isolation, power conditioning and segment termination are incorporated. These power supplies are ideal for all new installations requiring single-segment, non-redundant power in small to medium scale applications such as batch processing. A range of output voltages and currents is supported, allowing the modules to be used in a variety of fieldbus environments.
MTL F101 Fieldbus Power Supplies are intended for use in applications that require live-workable, Ôenergy-limitedÕ spurs in hazardous areas, where field devices are certified for up to 24V input. When used with Megablock wiring hubs with SpurGuard short circuit protection, the spurs are compatible with typical non-incendive and intrinsically safe fieldbus instruments in Zone 2 and Division 2.
MTL F102 Fieldbus Power Supplies are designed for all general-purpose applications. It has a high output voltage and is capable of powering heavily loaded segments and long cable lengths. It can also support energy-limited spurs with fieldbus devices having Ui² 30V.
MTL F104 ÔEco PowerÕ modules have low current consumption and are designed for use in applications where energy efficiency is important. A typical use would be in wind or solar-powered applications such as instrumentation nodes for remote well-heads. High efficiency is achieved by providing a lower output voltage to the fieldbus segment than with conventional fieldbus power supplies, eliminating unnecessary power dissipation in the fieldbus instruments. The 13V nominal output is sufficient to support up to 10 typical fieldbus instruments on a 200m trunk cable.