SensorWorx SWX-250-B SERIES wireless photocell and daylight harvesting
Auto-set-point calibration, where the unit determines its ambient light threshold (e.g., setpoint) based on the measured amount of light it is controlling, is initiated from the wireless photocell. The connected load controllers also provide the option of selecting from a range of preset values of ambient light thresholds (e.g., setpoints). There are four types of photocell operation supported; DAYLIGHT HARVESTING CONTROL, DAYLIGHT HARVESTING w/ ON/OFF CONTROL, ON/OFF PHOTOCELL CONTROL, and INHIBIT PHOTOCELL CONTROL (see descriptions below). These operational modes are selected at the linked wireless power pack ( These sensors can be used The sensor runs on one CR123(A) Lithium Battery (included). Install battery prior to mounting photocell. Polarity is indicated on the battery compartment door. If the photocellÕs battery life reaches 10%, all wirelessly linked load controllers will blink lights on/off/on upon initial turn on as a replacement warning. Replacement batteries are available at most retailers or home centers where batteries are sold or from Linking a wireless photocell with a wireless load controller (e.g.
Auto-set-point calibration, where the unit determines its ambient light threshold (e.g., setpoint) based on the measured amount of light it is controlling, is initiated from the wireless photocell. The connected load controllers also provide the option of selecting from a range of preset values of ambient light thresholds (e.g., setpoints). There are four types of photocell operation supported; DAYLIGHT HARVESTING CONTROL, DAYLIGHT HARVESTING w/ ON/OFF CONTROL, ON/OFF PHOTOCELL CONTROL, and INHIBIT PHOTOCELL CONTROL (see descriptions below). These operational modes are selected at the linked wireless power pack ( These sensors can be used The sensor runs on one CR123(A) Lithium Battery (included). Install battery prior to mounting photocell. Polarity is indicated on the battery compartment door. If the photocellÕs battery life reaches 10%, all wirelessly linked load controllers will blink lights on/off/on upon initial turn on as a replacement warning. Replacement batteries are available at most retailers or home centers where batteries are sold or from Linking a wireless photocell with a wireless load controller (e.g.
